Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
Calumet, Illinois

Magnum X5 Replacement Parts in Calumet

Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Calumet with no counter wait. Nearly every common failure is a stocked, inexpensive item.

Fast Shipping
Order by 1 PM CST
100% OEM
Never aftermarket
Shared Kits
X5 and X7 use the same pump kit

Pump, suction, gun, electrical — and the machine itself

Find it by symptom

What Your X5 Is Doing, and What Usually Fixes It

Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.

Will Not Prime

Most often a stuck intake ball or split suction tube.

Loses Pressure

Normally worn pump packings.

Spits or Tails

A worn tip gives fingers and tails.

Will Not Start

Control board or enclosure, once power is ruled out.

X5 parts by system

Serving Calumet and the wider Illinois area

Not sure which part?

Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.

+1 713-931-4102 or browse the parts diagrams →

Magnum X5 Parts in Calumet — Common Questions

Straight answers for homeowners repairing their own sprayer in Calumet, Illinois.

Do you ship X5 parts to Calumet?

Yes — we ship to all 2 Calumet ZIP codes, including 60406, and across Illinois. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.

Is it worth repairing an X5, or should I replace it?

In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.

Do X5 and X7 parts interchange?

Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.

My X5 will not prime — what do I change?

Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.

Are these genuine Graco parts?

We stock authentic Graco components only. Copy parts often cost more in the long run than they save.

How do I stop it failing again?

Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.

Magnum X5 Parts for Calumet, Illinois

Looking for genuine Graco airless paint sprayers and OEM replacement parts in Calumet, Illinois? Sprayersandparts.com ships directly to Calumet and the surrounding (60406, 60827) zip codes, so you get the exact parts you need without delay. Need a hard-to-find Graco part? We carry spray gun repair kits, needle and seat assemblies, inlet strainers, displacement rod sets, connecting rod kits, outlet valve assemblies, cylinder and piston sets, and pressure transducers — all genuine Graco OEM. We process and ship orders to Calumet every business day. Genuine Graco parts, competitive pricing, and real customer support make Sprayersandparts.com the choice for painters and contractors who can't afford to wait.

We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 2 Calumet ZIP codes (60406, 60827). Orders placed by 1 PM CST ship the same business day.

The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Genuine Graco, never aftermarket
Shared Kits
X5 and X7 pump kit in common
2 ZIPs
Covered in Calumet alone

Serving Illinois Homes and Workshops

The difference between genuine Graco parts and aftermarket copies is measurable: tighter tolerances, materials specified to Graco's engineering standards, and compatibility guaranteed for the exact model you own. Painters in Calumet, Illinois who work professionally choose OEM for a reason. Painters in Calumet, Illinois can rely on Sprayersandparts.com for consistent inventory, genuine Graco quality, and shipping they can track. Order today and have your parts in hand before your next job.

Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.

Illinois painters rely on Sprayers and Parts for authentic Graco sprayers, guns and replacement components. Our Illinois coverage spans 216 cities and towns — among them Addison, Algonquin, Alsip.We are a direct shipper rather than a walk-in store, which is exactly why we can carry the slow-moving and superseded parts that keep older sprayers running. Same-day dispatch applies to orders in before 1 PM CST, tracked the whole way.

Every Illinois order ships from the same warehouse on the same schedule.

Working outside Calumet? Browse every Illinois city we ship to to find your area.

Find Us on Google

See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Calumet.

View Our Google Profile
+1 713-931-4102
Fast shipping to Calumet 60406

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
“Grabbed one of these on a recommendation, and for the 287022 RAC X Tip Extension, 30 in (Part #287022) and the machine was back up and running the same day. Good value for a genuine Graco part.”
Verified Buyer · Part #287022
“Wasn't sure about the fit at first, but this 15R406 Label, Prostart Sys, Linedriver and the machine was back up and running the same day. Part #15R406 matched exactly. No issues at all - does exactly what it should.”
Verified Buyer · Part #15R406
“Needed a replacement 197304 Housing Inlet 3.0 Inch, part number 197304, and installation took less than ten minutes. Would order again without hesitation.”
Verified Buyer · Part #197304
“Wasn't sure about the fit at first, but this MTA106 Hopper Flange Seal and it solved the issue we were having right away. Part #MTA106 matched exactly. Would order again without hesitation.”
Verified Buyer · Part #MTA106
“Ordered this for a job and this LTX317 RAC X SwitchTip, 317 and the build quality matched what we expect from genuine Graco parts. Part #LTX317 matched exactly. This is now our go-to for replacement parts.”
Verified Buyer · Part #LTX317
“Ordered the 17E742 Label, Brand, Ultimatemxii, 1595, F (17E742) for our crew - the fit and finish were spot on, no surprises. Saved us a trip to the dealer.”
Verified Buyer · Part #17E742
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart