Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
Huntington, Indiana

Magnum X5 Replacement Parts in Huntington

Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Huntington with no counter wait. Nearly every common failure is a stocked, inexpensive item.

Fast Shipping
Order by 1 PM CST
100% OEM
Never aftermarket
Shared Kits
X5 and X7 use the same pump kit

Pump, suction, gun, electrical — and the machine itself

Find it by symptom

What Your X5 Is Doing, and What Usually Fixes It

Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.

Will Not Prime

Most often a stuck intake ball or split suction tube.

Loses Pressure

Normally worn pump packings.

Spits or Tails

A worn tip gives fingers and tails.

Will Not Start

Control board or enclosure, once power is ruled out.

X5 parts by system

Serving Huntington and the wider Indiana area

Not sure which part?

Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.

+1 713-931-4102 or browse the parts diagrams →

Magnum X5 Parts in Huntington — Common Questions

Straight answers for homeowners repairing their own sprayer in Huntington, Indiana.

Do you ship X5 parts to Huntington?

Yes — we ship to all 1 Huntington ZIP codes, including 46750, and across Indiana. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.

Is it worth repairing an X5, or should I replace it?

In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.

Do X5 and X7 parts interchange?

Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.

My X5 will not prime — what do I change?

Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.

Are these genuine Graco parts?

We stock authentic Graco components only. Copy parts often cost more in the long run than they save.

How do I stop it failing again?

Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.

Magnum X5 Parts for Huntington, Indiana

Contractors and DIY painters in Huntington, Indiana rely on Sprayersandparts.com for authentic Graco sprayers, spray guns, hoses, and repair kits. We serve the Huntington area (46750) with fast, traceable shipping every business day. From the smallest o-ring to a complete airless pump assembly, Sprayersandparts.com stocks the parts that keep Graco sprayers running. We also carry full replacement spray guns, pressure-relief valve assemblies, motor brushes, and electronic control boards for Ultra Max and GMax models. Shop the Sprayersandparts.com catalog by sprayer model, series, or part category to find exactly what you need. We ship to Huntington quickly and include tracking on every order so you always know where your parts are.

We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 1 Huntington ZIP codes (46750). Order by 1 PM CST and it ships same day, tracked.

The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Genuine Graco, never aftermarket
Shared Kits
X5 and X7 pump kit in common
1 ZIPs
Covered in Huntington alone

Serving Indiana Homes and Workshops

Graco has built its reputation on consistent, high-quality airless spray technology. For painters working in Huntington, Indiana, that reputation matters — on large commercial projects where downtime is costly and on residential jobs where finish quality is everything. Keep Sprayersandparts.com bookmarked for your Graco parts needs in Huntington, Indiana. From emergency replacements to scheduled maintenance parts, we have the inventory, the shipping speed, and the product knowledge to keep your operation running.

Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.

From small residential jobs to full commercial repaints, Indiana contractors source Graco parts through Sprayers and Parts. We currently serve 103 communities across the state, including Aboite, Adams, Addison.Stocking direct means we hold depth on the wear items that fail first — packings, filters, tips and pressure controls — instead of ordering them in. Order before 1 PM CST for same-day dispatch and full tracking across Indiana.

Every Indiana order ships from the same warehouse on the same schedule.

Working outside Huntington? Browse every Indiana city we ship to to find your area.

Find Us on Google

See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Huntington.

View Our Google Profile
+1 713-931-4102
Fast shipping to Huntington 46750

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
“Needed this fast for an active job site - this 288747 Manifold Outlet Paint (Strainer Screen 40 MESH) and it fit perfectly with no modifications needed. Part #288747 matched exactly. Good value for a genuine Graco part.”
Verified Buyer · Part #288747
“The 17J874 Pump Assembly Kit (Part #17J874) - it's holding up well after regular use on the job. Glad we found the exact part number we needed.”
Verified Buyer · Part #17J874
“Picked this up to replace a worn part and for the 288700 Inlet Pro X7 Repair Kit (Part #288700) and installation took less than ten minutes. No issues at all - does exactly what it should.”
Verified Buyer · Part #288700
“Needed this fast for an active job site - this 24B248 Complete Swivel Cap and it's been reliable through several jobs since. Part #24B248 matched exactly. Good value for a genuine Graco part.”
Verified Buyer · Part #24B248
“Ordered the 122667 Hexagonal Head Washer Drill Screw (122667) for our crew - it matched the original spec exactly, down to the part number. Exactly what was described - no complaints.”
Verified Buyer · Part #122667
KG
“The 112120 Pin Spring (Part #112120) - it fit perfectly with no modifications needed. Will be ordering more parts from here.”
Verified Buyer · Part #112120
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart