Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
Shawnee, Kansas

Magnum X5 Replacement Parts in Shawnee

Genuine Graco spares to get an X5 running again — pump kits, suction sets, guns and control parts, sent straight to Shawnee from our own shelves. A repack usually costs a fraction of a replacement machine.

Fast Shipping
Order by 1 PM CST
100% OEM
Never aftermarket
Shared Kits
X5 and X7 use the same pump kit

Delivering across Shawnee

8 ZIP codes served:
66012, 66203, 66214, 66216, 66217, 66218, 66226, 66227

Pump, suction, gun, electrical — and the machine itself

Find it by symptom

What Your X5 Is Doing, and What Usually Fixes It

Most Magnum faults fall into a small number of patterns. Start with what it is doing, not with the parts list. A two-minute call usually saves a wrong part.

Will Not Prime

Usually the intake valve or suction set.

Loses Pressure

The pump repair kit covers this.

Spits or Tails

Tip wear or a tired gun seat.

Will Not Start

Check the supply first, then the control board.

X5 parts by system

Serving Shawnee and the wider Kansas area

Not sure which part?

Tell us the symptom and the model — we can normally name the part from the behaviour alone.

+1 713-931-4102 or browse the parts diagrams →

Magnum X5 Parts in Shawnee — Common Questions

Straight answers for homeowners repairing their own sprayer in Shawnee, Kansas.

Do you ship X5 parts to Shawnee?

Yes — we ship to all 8 Shawnee ZIP codes, including 66012, and across Kansas. Orders placed by 1 PM CST ship the same business day. Small parts go out by post, so they arrive quickly.

Is it worth repairing an X5, or should I replace it?

Usually repair — the economics favour it heavily. Most repairs come to far less than a new unit. Replacement only really makes sense if the housing is cracked or the motor has failed outright.

Do X5 and X7 parts interchange?

Largely yes; the main pump kit is listed for X5 and X7 together. Most accessories fit the whole Magnum family. Enclosure and housing parts are model specific, so check those. We will verify fit against your exact unit.

My X5 will not prime — what do I change?

Usually the intake ball is stuck or the suction tube has split. Dried paint holding the intake ball on its seat is the most common cause of all. Failing that, look at the packings.

Are these genuine Graco parts?

All parts are original Graco, never aftermarket copies. Aftermarket packings wear differently and can score the cylinder.

How do I stop it failing again?

Flush it thoroughly straight after use. Pump protector stops the packings drying out between jobs. Almost every part we sell for these machines is replacing damage caused by dried paint.

Magnum X5 Parts for Shawnee, Kansas

Sprayersandparts.com is your online source for Graco airless sprayers, spray guns, hoses, and genuine OEM repair parts in Shawnee, Kansas. We process orders daily and ship throughout the Shawnee area (66012, 66203, 66214, 66216, and more). Our catalog extends beyond parts: we carry complete Graco airless sprayer packages, HVLP turbine and spray gun systems, texture sprayer setups, and line striping equipment — everything a painting contractor in Kansas needs to stay productive. Sprayersandparts.com stands behind every order with responsive customer support. If you're unsure which part fits your model, contact us with your sprayer's serial number and we'll confirm compatibility before you buy.

We carry real depth on fast-wearing components — packings, filters, spray tips and pressure controls — and ship to all 8 Shawnee ZIP codes (66012, 66203, 66214, 66216, 66217, 66218, 66226, 66227). Orders placed by 1 PM CST ship the same business day.

Why it matters: most X5s written off as dead need an intake valve and an hour — usually for less than the price of the paint you were going to spray.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Genuine Graco, never aftermarket
Shared Kits
X5 and X7 pump kit in common
8 ZIPs
Covered in Shawnee alone

Serving Kansas Homes and Workshops

Paint sprayer performance comes down to parts quality. In Shawnee, Kansas, professionals who have switched to genuine Graco OEM components report fewer pressure drops, longer pump life, and better tip-to-tip consistency than those who rely on aftermarket alternatives. Bookmark Sprayersandparts.com as your Graco source for Shawnee, Kansas. We maintain inventory year-round, ship every business day, and can help you identify the right part number when you're not sure which component fits your specific unit.

Tell us your model and serial number and we will confirm the exact part before you order. We ship direct instead of running a counter, which lets us hold parts for machines twenty years old.

Sprayers and Parts supplies painting contractors across Kansas with factory-genuine Graco equipment. Orders go out daily to 28 Kansas locations, including Bruno, Derby, Dodge City.Running online instead of a storefront lets us hold stock most local suppliers cannot justify, right down to obsolete components for older machines still earning their keep. Orders placed before 1 PM CST ship the same business day, with tracking on every parcel.

Wherever you are in Kansas, the same stock and the same dispatch times apply.

Working outside Shawnee? Browse every Kansas city we ship to to find your area.

Find Us on Google

Check our profile, ratings and opening hours on our Google Business Profile — then order online for delivery to Shawnee.

View Our Google Profile
+1 713-931-4102
Fast shipping to Shawnee 66012

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
“Ordered the 241113 Clutch Repair Kit (241113) for our crew - installation took less than ten minutes. Glad we found the exact part number we needed.”
Verified Buyer · Part #241113
“Needed a replacement 24B825 Displacement Rod Kit (1200, 290C), part number 24B825, and it's been reliable through several jobs since. Good value for a genuine Graco part.”
Verified Buyer · Part #24B825
“Bought this after the original wore out, and this 113955 Carriage Bolt and it fit perfectly with no modifications needed. Part #113955 matched exactly. Would order again without hesitation.”
Verified Buyer · Part #113955
VD
“Grabbed one of these on a recommendation, and for the 187627 Inlet Tube (Part #187627) and it solved the issue we were having right away. This is now our go-to for replacement parts.”
Verified Buyer · Part #187627
“This was a straightforward swap - this 222198 Pressure Drain Valve Kit and it's been reliable through several jobs since. Part #222198 matched exactly. Would order again without hesitation.”
Verified Buyer · Part #222198
“Needed a replacement 25N286 Carbide Flail 8 pt. 8 in. Medium Cut Rebuild Kit for Pro / H..., part number 25N286, and the build quality matched what we expect from genuine Graco parts. This is now our go-to for replacement parts.”
Verified Buyer · Part #25N286
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart