Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
Summit, Michigan

Magnum X5 Replacement Parts in Summit

Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Summit with no counter wait. Nearly every common failure is a stocked, inexpensive item.

Fast Shipping
Order by 1 PM CST
100% OEM
Never aftermarket
Shared Kits
X5 and X7 use the same pump kit

Delivering across Summit

3 ZIP codes served:
49201, 49203, 49246

Pump, suction, gun, electrical — and the machine itself

Find it by symptom

What Your X5 Is Doing, and What Usually Fixes It

Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.

Will Not Prime

Most often a stuck intake ball or split suction tube.

Loses Pressure

Normally worn pump packings.

Spits or Tails

A worn tip gives fingers and tails.

Will Not Start

Control board or enclosure, once power is ruled out.

X5 parts by system

Serving Summit and the wider Michigan area

Not sure which part?

Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.

+1 713-931-4102 or browse the parts diagrams →

Magnum X5 Parts in Summit — Common Questions

Straight answers for homeowners repairing their own sprayer in Summit, Michigan.

Do you ship X5 parts to Summit?

Yes — we ship to all 3 Summit ZIP codes, including 49201, and across Michigan. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.

Is it worth repairing an X5, or should I replace it?

In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.

Do X5 and X7 parts interchange?

Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.

My X5 will not prime — what do I change?

Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.

Are these genuine Graco parts?

We stock authentic Graco components only. Copy parts often cost more in the long run than they save.

How do I stop it failing again?

Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.

Magnum X5 Parts for Summit, Michigan

Painting professionals in Summit, Michigan know that downtime costs money. Sprayersandparts.com keeps your crew moving by delivering genuine Graco airless sprayer parts to the Summit area (49201, 49203, 49246) with same-business-day processing. We supply everything from Graco Magnum replacement tips and filters to complete Ultra Max II 1095 piston pump assemblies. Our stock also includes Graco spray hoses in 1/4" and 3/8" diameters, ranging from 25 ft to 100 ft, plus all standard Graco gun and hose fittings. Your Graco sprayer investment is protected when you use OEM parts from Sprayersandparts.com. We ship to Summit daily, offer straightforward returns, and provide part-matching assistance so you order with confidence.

We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 3 Summit ZIP codes (49201, 49203, 49246). Orders placed by 1 PM CST ship the same business day.

The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Genuine Graco, never aftermarket
Shared Kits
X5 and X7 pump kit in common
3 ZIPs
Covered in Summit alone

Serving Michigan Homes and Workshops

Airless painting in Summit, Michigan demands reliable equipment. Graco's lineup — from the compact Magnum X5 to the high-volume Ultra Max II 1095 — covers every application scale, and keeping these sprayers running requires genuine OEM parts, not substitutes that can wear prematurely or fail mid-job. Bookmark Sprayersandparts.com as your Graco source for Summit, Michigan. We maintain inventory year-round, ship every business day, and can help you identify the right part number when you're not sure which component fits your specific unit.

Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.

Across Michigan, painting crews and property maintenance teams order their Graco parts from Sprayers and Parts. We currently serve 120 communities across the state, including Adrian, Allen Park, Allendale.Stocking direct means we hold depth on the wear items that fail first — packings, filters, tips and pressure controls — instead of ordering them in. Order before 1 PM CST for same-day dispatch and full tracking across Michigan.

Every Michigan order ships from the same warehouse on the same schedule.

Working outside Summit? Browse every Michigan city we ship to to find your area.

Find Us on Google

See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Summit.

View Our Google Profile
+1 713-931-4102
Fast shipping to Summit 49201

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
“The 287030 CleanShot Valve (Part #287030) - it solved the issue we were having right away. Will be ordering more parts from here.”
Verified Buyer · Part #287030
“Needed a replacement 17B636 Handheld Lid, part number 17B636, and the machine was back up and running the same day. Will be ordering more parts from here.”
Verified Buyer · Part #17B636
“The 17C590 Tall Filter Manifold (Part #17C590) - it fit perfectly with no modifications needed. Glad we found the exact part number we needed.”
Verified Buyer · Part #17C590
“This was a straightforward swap - this 244894 O-Ring Kit 10PK and it's holding up well after regular use on the job. Part #244894 matched exactly. Exactly what was described - no complaints.”
Verified Buyer · Part #244894
“Needed a replacement 172056 Retainer Spring, part number 172056, and it matched the original spec exactly, down to the part number. Easy to order once I had the part number from the diagram.”
Verified Buyer · Part #172056
“Our crew has used a few of these now and for the 24W619 PC Pump Cylinder (Part #24W619) and it's holding up well after regular use on the job. Exactly what was described - no complaints.”
Verified Buyer · Part #24W619
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart