Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
Clayton, Missouri

Magnum X5 Replacement Parts in Clayton

Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Clayton with no counter wait. Nearly every common failure is a stocked, inexpensive item.

Fast Shipping
Order by 1 PM CST
100% OEM
Never aftermarket
Shared Kits
X5 and X7 use the same pump kit

Pump, suction, gun, electrical — and the machine itself

Find it by symptom

What Your X5 Is Doing, and What Usually Fixes It

Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.

Will Not Prime

Most often a stuck intake ball or split suction tube.

Loses Pressure

Normally worn pump packings.

Spits or Tails

A worn tip gives fingers and tails.

Will Not Start

Control board or enclosure, once power is ruled out.

X5 parts by system

Serving Clayton and the wider Missouri area

Not sure which part?

Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.

+1 713-931-4102 or browse the parts diagrams →

Magnum X5 Parts in Clayton — Common Questions

Straight answers for homeowners repairing their own sprayer in Clayton, Missouri.

Do you ship X5 parts to Clayton?

Yes — we ship to all 2 Clayton ZIP codes, including 63105, and across Missouri. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.

Is it worth repairing an X5, or should I replace it?

In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.

Do X5 and X7 parts interchange?

Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.

My X5 will not prime — what do I change?

Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.

Are these genuine Graco parts?

We stock authentic Graco components only. Copy parts often cost more in the long run than they save.

How do I stop it failing again?

Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.

Magnum X5 Parts for Clayton, Missouri

Get genuine Graco sprayers and parts delivered to Clayton, Missouri through Sprayersandparts.com. Our inventory covers thousands of OEM components for Magnum, ProX, FinishPro, and Ultra Max series sprayers — all shipping to Clayton (63105, 63124). Specialty items like Graco DataTrak displays, SmartControl pressure systems, and DualTip spray gun handles are available alongside everyday consumables such as tips, strainers, and lubricant. We carry parts for both electric and gas-powered Graco sprayer models. All orders ship with tracking, and our support team can help you identify the correct part number for your specific Graco sprayer. For painters in Clayton, Sprayersandparts.com is the reliable online alternative to hunting parts locally.

We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 2 Clayton ZIP codes (63105, 63124). Same-day dispatch on orders in before 1 PM CST.

The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Genuine Graco, never aftermarket
Shared Kits
X5 and X7 pump kit in common
2 ZIPs
Covered in Clayton alone

Serving Missouri Homes and Workshops

The difference between genuine Graco parts and aftermarket copies is measurable: tighter tolerances, materials specified to Graco's engineering standards, and compatibility guaranteed for the exact model you own. Painters in Clayton, Missouri who work professionally choose OEM for a reason. Sprayersandparts.com is committed to keeping Clayton, Missouri painters productive. Genuine Graco parts, fast order processing, and knowledgeable support mean you spend less time sourcing and more time painting.

Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.

We ship genuine Graco equipment to painting professionals throughout Missouri. Our Missouri coverage spans 59 cities and towns — among them Affton, Arnold, Ballwin.We are a direct shipper rather than a walk-in store, which is exactly why we can carry the slow-moving and superseded parts that keep older sprayers running. Same-day dispatch applies to orders in before 1 PM CST, tracked the whole way.

Every Missouri order ships from the same warehouse on the same schedule.

Working outside Clayton? Browse every Missouri city we ship to to find your area.

Find Us on Google

See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Clayton.

View Our Google Profile
+1 713-931-4102
Fast shipping to Clayton 63105

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
“Replaced the OEM part with this one and this 24A254 Vee Repair Kit 100cc and the build quality matched what we expect from genuine Graco parts. Part #24A254 matched exactly. This is now our go-to for replacement parts.”
Verified Buyer · Part #24A254
“Needed this fast for an active job site - this 198921 Label, Instruction and the machine was back up and running the same day. Part #198921 matched exactly. Good value for a genuine Graco part.”
Verified Buyer · Part #198921
“Bought this after the original wore out, and for the 1065037A Hex Drive Shaft Assembly (Part #1065037A) and it's been reliable through several jobs since. Customer support was helpful when I had questions about fit.”
Verified Buyer · Part #1065037A
“Our crew has used a few of these now and for the 278723 Pail Gasket (Part #278723) and it matched the original spec exactly, down to the part number. Would order again without hesitation.”
Verified Buyer · Part #278723
“Needed a replacement 176754 Male Gland Packing, part number 176754, and it solved the issue we were having right away. Would order again without hesitation.”
Verified Buyer · Part #176754
“This was a straightforward swap - for the 245673 Inlet Strainer for Pro210ES (Part #245673) and it's holding up well after regular use on the job. No issues at all - does exactly what it should.”
Verified Buyer · Part #245673
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart