Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
Ferguson, Missouri

Magnum X5 Replacement Parts in Ferguson

Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Ferguson with no counter wait. Nearly every common failure is a stocked, inexpensive item.

Fast Shipping
Order by 1 PM CST
100% OEM
Never aftermarket
Shared Kits
X5 and X7 use the same pump kit

Delivering across Ferguson

4 ZIP codes served:
63121, 63134, 63135, 63136

Pump, suction, gun, electrical — and the machine itself

Find it by symptom

What Your X5 Is Doing, and What Usually Fixes It

Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.

Will Not Prime

Most often a stuck intake ball or split suction tube.

Loses Pressure

Normally worn pump packings.

Spits or Tails

A worn tip gives fingers and tails.

Will Not Start

Control board or enclosure, once power is ruled out.

X5 parts by system

Serving Ferguson and the wider Missouri area

Not sure which part?

Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.

+1 713-931-4102 or browse the parts diagrams →

Magnum X5 Parts in Ferguson — Common Questions

Straight answers for homeowners repairing their own sprayer in Ferguson, Missouri.

Do you ship X5 parts to Ferguson?

Yes — we ship to all 4 Ferguson ZIP codes, including 63121, and across Missouri. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.

Is it worth repairing an X5, or should I replace it?

In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.

Do X5 and X7 parts interchange?

Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.

My X5 will not prime — what do I change?

Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.

Are these genuine Graco parts?

We stock authentic Graco components only. Copy parts often cost more in the long run than they save.

How do I stop it failing again?

Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.

Magnum X5 Parts for Ferguson, Missouri

Contractors and DIY painters in Ferguson, Missouri rely on Sprayersandparts.com for authentic Graco sprayers, spray guns, hoses, and repair kits. We serve the Ferguson area (63121, 63134, 63135, 63136) with fast, traceable shipping every business day. From the smallest o-ring to a complete airless pump assembly, Sprayersandparts.com stocks the parts that keep Graco sprayers running. We also carry full replacement spray guns, pressure-relief valve assemblies, motor brushes, and electronic control boards for Ultra Max and GMax models. Shop the Sprayersandparts.com catalog by sprayer model, series, or part category to find exactly what you need. We ship to Ferguson quickly and include tracking on every order so you always know where your parts are.

We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 4 Ferguson ZIP codes (63121, 63134, 63135, 63136). Orders placed by 1 PM CST ship the same business day.

The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Genuine Graco, never aftermarket
Shared Kits
X5 and X7 pump kit in common
4 ZIPs
Covered in Ferguson alone

Serving Missouri Homes and Workshops

Graco has built its reputation on consistent, high-quality airless spray technology. For painters working in Ferguson, Missouri, that reputation matters — on large commercial projects where downtime is costly and on residential jobs where finish quality is everything. Sprayersandparts.com is committed to keeping Ferguson, Missouri painters productive. Genuine Graco parts, fast order processing, and knowledgeable support mean you spend less time sourcing and more time painting.

Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.

We ship genuine Graco equipment to painting professionals throughout Missouri. Our Missouri coverage spans 59 cities and towns — among them Affton, Arnold, Ballwin.We are a direct shipper rather than a walk-in store, which is exactly why we can carry the slow-moving and superseded parts that keep older sprayers running. Same-day dispatch applies to orders in before 1 PM CST, tracked the whole way.

Every Missouri order ships from the same warehouse on the same schedule.

Working outside Ferguson? Browse every Missouri city we ship to to find your area.

Find Us on Google

See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Ferguson.

View Our Google Profile
+1 713-931-4102
Fast shipping to Ferguson 63121

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
“Had this on hand as a spare and for the 16M273 Steering Cable Kit for LineLazer LL250 (Part #16M273 ) and it matched the original spec exactly, down to the part number. Good value for a genuine Graco part.”
Verified Buyer · Part #16M273
“Ordered this for a job and this 24W830 Coupled Hose Kit and the build quality matched what we expect from genuine Graco parts. Part #24W830 matched exactly. Glad we found the exact part number we needed.”
Verified Buyer · Part #24W830
“Needed this fast for an active job site - this 288184 Peek Needle Tip Kit .042 and the fit and finish were spot on, no surprises. Part #288184 matched exactly. This is now our go-to for replacement parts.”
Verified Buyer · Part #288184
“Needed a replacement 16D531 Packing O-Ring, part number 16D531, and the fit and finish were spot on, no surprises. Easy to order once I had the part number from the diagram.”
Verified Buyer · Part #16D531
“The 286525 RAC 5 SwitchTip, 525 (Part #286525) - it's been reliable through several jobs since. Customer support was helpful when I had questions about fit.”
Verified Buyer · Part #286525
“This was a straightforward swap - for the 245673 Inlet Strainer for Pro210ES (Part #245673) and it's holding up well after regular use on the job. No issues at all - does exactly what it should.”
Verified Buyer · Part #245673
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart