Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
Dover, New Hampshire

Magnum X5 Replacement Parts in Dover

Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Dover with no counter wait. Nearly every common failure is a stocked, inexpensive item.

Fast Shipping
Order by 1 PM CST
100% OEM
Never aftermarket
Shared Kits
X5 and X7 use the same pump kit

Pump, suction, gun, electrical — and the machine itself

Find it by symptom

What Your X5 Is Doing, and What Usually Fixes It

Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.

Will Not Prime

Most often a stuck intake ball or split suction tube.

Loses Pressure

Normally worn pump packings.

Spits or Tails

A worn tip gives fingers and tails.

Will Not Start

Control board or enclosure, once power is ruled out.

X5 parts by system

Serving Dover and the wider New Hampshire area

Not sure which part?

Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.

+1 713-931-4102 or browse the parts diagrams →

Magnum X5 Parts in Dover — Common Questions

Straight answers for homeowners repairing their own sprayer in Dover, New Hampshire.

Do you ship X5 parts to Dover?

Yes — we ship to all 3 Dover ZIP codes, including 03820, and across New Hampshire. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.

Is it worth repairing an X5, or should I replace it?

In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.

Do X5 and X7 parts interchange?

Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.

My X5 will not prime — what do I change?

Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.

Are these genuine Graco parts?

We stock authentic Graco components only. Copy parts often cost more in the long run than they save.

How do I stop it failing again?

Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.

Magnum X5 Parts for Dover, New Hampshire

Sprayersandparts.com is your online source for Graco airless sprayers, spray guns, hoses, and genuine OEM repair parts in Dover, New Hampshire. We process orders daily and ship throughout the Dover area (03820, 03821, 03822). Our catalog extends beyond parts: we carry complete Graco airless sprayer packages, HVLP turbine and spray gun systems, texture sprayer setups, and line striping equipment — everything a painting contractor in New Hampshire needs to stay productive. Sprayersandparts.com stands behind every order with responsive customer support. If you're unsure which part fits your model, contact us with your sprayer's serial number and we'll confirm compatibility before you buy.

We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 3 Dover ZIP codes (03820, 03821, 03822). Order by 1 PM CST and it ships same day, tracked.

The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Genuine Graco, never aftermarket
Shared Kits
X5 and X7 pump kit in common
3 ZIPs
Covered in Dover alone

Serving New Hampshire Homes and Workshops

Paint sprayer performance comes down to parts quality. In Dover, New Hampshire, professionals who have switched to genuine Graco OEM components report fewer pressure drops, longer pump life, and better tip-to-tip consistency than those who rely on aftermarket alternatives. Painters in Dover, New Hampshire can rely on Sprayersandparts.com for consistent inventory, genuine Graco quality, and shipping they can track. Order today and have your parts in hand before your next job.

Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.

From small residential jobs to full commercial repaints, New Hampshire contractors source Graco parts through Sprayers and Parts. Our New Hampshire coverage spans 18 cities and towns — among them Bedford, Concord, Derry.We are a direct shipper rather than a walk-in store, which is exactly why we can carry the slow-moving and superseded parts that keep older sprayers running. Same-day dispatch applies to orders in before 1 PM CST, tracked the whole way.

Every New Hampshire order ships from the same warehouse on the same schedule.

Working outside Dover? Browse every New Hampshire city we ship to to find your area.

Find Us on Google

See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Dover.

View Our Google Profile
+1 713-931-4102
Fast shipping to Dover 03820

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
“Ordered the 176749 Vee Leather Packing (176749) for our crew - the fit and finish were spot on, no surprises. Glad we found the exact part number we needed.”
Verified Buyer · Part #176749
“Wasn't sure about the fit at first, but this 235703 Pump Repair Kit and it matched the original spec exactly, down to the part number. Part #235703 matched exactly. No issues at all - does exactly what it should.”
Verified Buyer · Part #235703
“The 17C590 Tall Filter Manifold (Part #17C590) - it fit perfectly with no modifications needed. Glad we found the exact part number we needed.”
Verified Buyer · Part #17C590
“Wasn't sure about the fit at first, but this 15R406 Label, Prostart Sys, Linedriver and the machine was back up and running the same day. Part #15R406 matched exactly. No issues at all - does exactly what it should.”
Verified Buyer · Part #15R406
“Ordered the 241109 Clutch Repair Kit (241109) for our crew - shipping was quick and the part was packaged well. No issues at all - does exactly what it should.”
Verified Buyer · Part #241109
“Needed a replacement 18H254 Kit, Replacement Display And Control Board Hp, part number 18H254, and it's been reliable through several jobs since. Saved us a trip to the dealer.”
Verified Buyer · Part #18H254
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart