Magnum X5 Replacement Parts in Merrimack
Factory-original Magnum parts, so a tired X5 gets rebuilt rather than binned, dispatched to Merrimack without a distributor in the middle. Most X5 faults come down to a handful of parts, and we stock all of them.
Delivering across Merrimack
1 ZIP codes served:
03054
What Your X5 Is Doing, and What Usually Fixes It
The X5 tends to fail in predictable ways. The behaviour points at the part far more reliably than the diagram does. If in doubt, call us before ordering — it costs nothing to check.
Will Not Prime
Check the inlet valve and suction tube first.
Loses Pressure
Packings pass once worn, so pressure drifts.
Spits or Tails
Usually the tip or gun needle.
Will Not Start
Often an extension lead, not the machine.
X5 parts by system
Serving Merrimack and the wider New Hampshire area
- Pump repair kit — shared across X5 and X7
- Intake valve & suction set — priming faults
- Prime/spray drain valve — will not switch or leaks
- TrueAirless tips — pattern and finish problems
- Hose sets & extensions — reach and replacements
- Control board & enclosure — electrical faults
Not sure which part?
Say what it does when you pull the trigger — that is usually quicker than reading part numbers off a diagram.
+1 713-931-4102 or browse the parts diagrams →We also ship to 8 nearby New Hampshire communities
Bedford, Laconia, Dover, Manchester, Londonderry, Concord, Hudson, Rochester
Magnum X5 Parts in Merrimack — Common Questions
Straight answers for homeowners repairing their own sprayer in Merrimack, New Hampshire.
Do you ship X5 parts to Merrimack?
Yes — we ship to all 1 Merrimack ZIP codes, including 03054, and across New Hampshire. Same-day dispatch applies to orders in before 1 PM CST. Small parts go out by post, so they arrive quickly.
Is it worth repairing an X5, or should I replace it?
Nearly always worth fixing. A pump repair kit costs a small fraction of a new machine. Consider replacing if the motor is dead or the frame is damaged.
Do X5 and X7 parts interchange?
A good number are shared, including the pump kit. Guns, hoses and tips are common across the Magnum range. Body and enclosure parts differ between models. Ask us and we will check it.
My X5 will not prime — what do I change?
Start with the intake valve and the suction set. A ball stuck with old material stops it drawing entirely. If the intake is sound, move on to the pump kit.
Are these genuine Graco parts?
Every part we sell is factory-genuine Graco. Imitation seals fail early and damage the pump.
How do I stop it failing again?
The end-of-job clean is the whole maintenance routine. Store it with pump protector fluid rather than water. Most failures we supply parts for started as poor cleaning.
Magnum X5 Parts for Merrimack, New Hampshire
Need Graco sprayer parts in Merrimack, New Hampshire? Sprayersandparts.com stocks thousands of OEM Graco components — from Magnum X5 and X7 parts to Pro and Ultra Max II repair kits — and ships them straight to Merrimack (03054). Our Graco parts inventory covers every major series: Magnum (residential), ProX and Ultra Max II (contractor), GMax and King (heavy-duty commercial), Plus HVLP and FinishPro (fine-finish), and TrueCoat (handheld). We stock OEM tips, filters, guns, hoses, and full repair kits for all of them. Sprayersandparts.com makes it easy for Merrimack painters to keep their Graco equipment in top condition. Browse by part type or sprayer model, add to cart, and your genuine OEM parts will be on their way to Merrimack the same day.
We keep the first-to-fail items on the shelf — packings, filters, spray tips and pressure controls — and ship to all 1 Merrimack ZIP codes (03054). Order by 1 PM CST and it ships same day, tracked.
Worth knowing: the machine in your garage is probably fixable — the parts cost far less than people assume.
Serving New Hampshire Homes and Workshops
For Merrimack, New Hampshire painting contractors, equipment reliability directly affects project schedules and profitability. A worn pump packing, a clogged filter, or a damaged spray tip can stop a crew in its tracks. Stocking a few key Graco OEM replacement parts prevents that scenario. Keep Sprayersandparts.com bookmarked for your Graco parts needs in Merrimack, New Hampshire. From emergency replacements to scheduled maintenance parts, we have the inventory, the shipping speed, and the product knowledge to keep your operation running.
Send your sprayer model and we will verify fitment before you buy. We stock centrally rather than locally, which is why our inventory runs deeper than a regional dealer.
From small residential jobs to full commercial repaints, New Hampshire contractors source Graco parts through Sprayers and Parts. Our New Hampshire coverage spans 18 cities and towns — among them Bedford, Concord, Derry.We are a direct shipper rather than a walk-in store, which is exactly why we can carry the slow-moving and superseded parts that keep older sprayers running. Same-day dispatch applies to orders in before 1 PM CST, tracked the whole way.
Coverage is identical across New Hampshire — same inventory, same cut-off.
Working outside Merrimack? Browse every New Hampshire city we ship to to find your area.
Find Us on Google
View verified reviews and how to reach us on our Google Business Profile — then order online for delivery to Merrimack.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.