Magnum X5 Replacement Parts in Tinton-falls
Genuine Graco spares to get an X5 running again — pump kits, suction sets, guns and control parts, sent straight to Tinton-falls from our own shelves. A repack usually costs a fraction of a replacement machine.
Delivering across Tinton-falls
5 ZIP codes served:
07701, 07712, 07724, 07727, 07753
What Your X5 Is Doing, and What Usually Fixes It
Most Magnum faults fall into a small number of patterns. Start with what it is doing, not with the parts list. A two-minute call usually saves a wrong part.
Will Not Prime
Usually the intake valve or suction set.
Loses Pressure
The pump repair kit covers this.
Spits or Tails
Tip wear or a tired gun seat.
Will Not Start
Check the supply first, then the control board.
X5 parts by system
Serving Tinton-falls and the wider New Jersey area
- Pump repair kit — shared across X5 and X7
- Intake valve & suction set — priming faults
- Prime/spray drain valve — will not switch or leaks
- TrueAirless tips — pattern and finish problems
- Hose sets & extensions — reach and replacements
- Control board & enclosure — electrical faults
Not sure which part?
Tell us the symptom and the model — we can normally name the part from the behaviour alone.
+1 713-931-4102 or browse the parts diagrams →We also ship to 8 nearby New Jersey communities
Ramsey, Ridgewood, Hillside, Ewing, Avenel, Little-egg-harbor, Princeton, South-orange-village
Magnum X5 Parts in Tinton-falls — Common Questions
Straight answers for homeowners repairing their own sprayer in Tinton-falls, New Jersey.
Do you ship X5 parts to Tinton-falls?
Yes — we ship to all 5 Tinton-falls ZIP codes, including 07701, and across New Jersey. Orders placed by 1 PM CST ship the same business day. Small parts go out by post, so they arrive quickly.
Is it worth repairing an X5, or should I replace it?
Usually repair — the economics favour it heavily. Most repairs come to far less than a new unit. Replacement only really makes sense if the housing is cracked or the motor has failed outright.
Do X5 and X7 parts interchange?
Largely yes; the main pump kit is listed for X5 and X7 together. Most accessories fit the whole Magnum family. Enclosure and housing parts are model specific, so check those. We will verify fit against your exact unit.
My X5 will not prime — what do I change?
Usually the intake ball is stuck or the suction tube has split. Dried paint holding the intake ball on its seat is the most common cause of all. Failing that, look at the packings.
Are these genuine Graco parts?
All parts are original Graco, never aftermarket copies. Aftermarket packings wear differently and can score the cylinder.
How do I stop it failing again?
Flush it thoroughly straight after use. Pump protector stops the packings drying out between jobs. Almost every part we sell for these machines is replacing damage caused by dried paint.
Magnum X5 Parts for Tinton-falls, New Jersey
Contractors and DIY painters in Tinton-falls, New Jersey rely on Sprayersandparts.com for authentic Graco sprayers, spray guns, hoses, and repair kits. We serve the Tinton-falls area (07701, 07712, 07724, 07727, and more) with fast, traceable shipping every business day. From the smallest o-ring to a complete airless pump assembly, Sprayersandparts.com stocks the parts that keep Graco sprayers running. We also carry full replacement spray guns, pressure-relief valve assemblies, motor brushes, and electronic control boards for Ultra Max and GMax models. Shop the Sprayersandparts.com catalog by sprayer model, series, or part category to find exactly what you need. We ship to Tinton-falls quickly and include tracking on every order so you always know where your parts are.
We carry real depth on fast-wearing components — packings, filters, spray tips and pressure controls — and ship to all 5 Tinton-falls ZIP codes (07701, 07712, 07724, 07727, 07753). Anything ordered before 1 PM CST leaves that day.
Why it matters: most X5s written off as dead need an intake valve and an hour — usually for less than the price of the paint you were going to spray.
Serving New Jersey Homes and Workshops
Running a Graco airless sprayer in Tinton-falls, New Jersey means occasionally replacing wear items — tips, filters, pump packings, and inlet valve assemblies. Sourcing those from an authorized dealer ensures they're made to spec and won't void your warranty or shorten your equipment's life. For Tinton-falls, New Jersey painting professionals, Sprayersandparts.com is the straightforward solution: genuine Graco parts, a full sprayer catalog, fast shipping, and support when you need help identifying what your sprayer needs.
Tell us your model and serial number and we will confirm the exact part before you order. We ship direct instead of running a counter, which lets us hold parts for machines twenty years old.
We ship genuine Graco equipment to painting professionals throughout New Jersey. We currently serve 172 communities across the state, including Aberdeen, Asbury Park, Atlantic City.Stocking direct means we hold depth on the wear items that fail first — packings, filters, tips and pressure controls — instead of ordering them in. Order before 1 PM CST for same-day dispatch and full tracking across New Jersey.
Wherever you are in New Jersey, the same stock and the same dispatch times apply.
Working outside Tinton-falls? Browse every New Jersey city we ship to to find your area.
Find Us on Google
Check our profile, ratings and opening hours on our Google Business Profile — then order online for delivery to Tinton-falls.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.