Magnum X5 Replacement Parts in Bayside
Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Bayside with no counter wait. Nearly every common failure is a stocked, inexpensive item.
Delivering across Bayside
4 ZIP codes served:
11359, 11360, 11361, 11364
What Your X5 Is Doing, and What Usually Fixes It
Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.
Will Not Prime
Most often a stuck intake ball or split suction tube.
Loses Pressure
Normally worn pump packings.
Spits or Tails
A worn tip gives fingers and tails.
Will Not Start
Control board or enclosure, once power is ruled out.
X5 parts by system
Serving Bayside and the wider New York area
- Pump repair kit — shared across X5 and X7
- Intake valve & suction set — priming faults
- Prime/spray drain valve — will not switch or leaks
- TrueAirless tips — pattern and finish problems
- Hose sets & extensions — reach and replacements
- Control board & enclosure — electrical faults
Not sure which part?
Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.
+1 713-931-4102 or browse the parts diagrams →Magnum X5 Parts in Bayside — Common Questions
Straight answers for homeowners repairing their own sprayer in Bayside, New York.
Do you ship X5 parts to Bayside?
Yes — we ship to all 4 Bayside ZIP codes, including 11359, and across New York. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.
Is it worth repairing an X5, or should I replace it?
In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.
Do X5 and X7 parts interchange?
Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.
My X5 will not prime — what do I change?
Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.
Are these genuine Graco parts?
We stock authentic Graco components only. Copy parts often cost more in the long run than they save.
How do I stop it failing again?
Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.
Magnum X5 Parts for Bayside, New York
Sprayersandparts.com supplies Bayside, New York with authentic Graco airless sprayers and OEM parts. From simple filters and tips to complete pump rebuild kits, every item ships directly to Bayside (11359, 11360, 11361, 11364) — no waiting on a local distributor. Our inventory covers Graco's entire residential and contractor sprayer line, including Magnum series (X3, X5, X7, ProX19), TrueCoat, FinishPro HVLP, Ultra Max II, GMax, and King sprayers. We also stock texture sprayer parts for the Graco ToughTek and RTX series. Sprayersandparts.com ships Graco parts to Bayside with tracking on every order. Our team is available to help you confirm part compatibility, troubleshoot your sprayer, or advise on the right tip size for your coating and application.
We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 4 Bayside ZIP codes (11359, 11360, 11361, 11364). Anything ordered before 1 PM CST leaves that day.
The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.
Serving New York Homes and Workshops
For Bayside, New York painting contractors, equipment reliability directly affects project schedules and profitability. A worn pump packing, a clogged filter, or a damaged spray tip can stop a crew in its tracks. Stocking a few key Graco OEM replacement parts prevents that scenario. Keep Sprayersandparts.com bookmarked for your Graco parts needs in Bayside, New York. From emergency replacements to scheduled maintenance parts, we have the inventory, the shipping speed, and the product knowledge to keep your operation running.
Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.
Across New York, painting crews and property maintenance teams order their Graco parts from Sprayers and Parts. Orders go out daily to 222 New York locations, including Albany, Amherst, Amsterdam.Running online instead of a storefront lets us hold stock most local suppliers cannot justify, right down to obsolete components for older machines still earning their keep. Orders placed before 1 PM CST ship the same business day, with tracking on every parcel.
Every New York order ships from the same warehouse on the same schedule.
Working outside Bayside? Browse every New York city we ship to to find your area.
Find Us on Google
See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Bayside.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.