Magnum X5 Replacement Parts in Grand-forks
Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Grand-forks with no counter wait. Nearly every common failure is a stocked, inexpensive item.
Delivering across Grand-forks
6 ZIP codes served:
58201, 58202, 58203, 58206, 58207, 58208
What Your X5 Is Doing, and What Usually Fixes It
Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.
Will Not Prime
Most often a stuck intake ball or split suction tube.
Loses Pressure
Normally worn pump packings.
Spits or Tails
A worn tip gives fingers and tails.
Will Not Start
Control board or enclosure, once power is ruled out.
X5 parts by system
Serving Grand-forks and the wider North Dakota area
- Pump repair kit — shared across X5 and X7
- Intake valve & suction set — priming faults
- Prime/spray drain valve — will not switch or leaks
- TrueAirless tips — pattern and finish problems
- Hose sets & extensions — reach and replacements
- Control board & enclosure — electrical faults
Not sure which part?
Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.
+1 713-931-4102 or browse the parts diagrams →Magnum X5 Parts in Grand-forks — Common Questions
Straight answers for homeowners repairing their own sprayer in Grand-forks, North Dakota.
Do you ship X5 parts to Grand-forks?
Yes — we ship to all 6 Grand-forks ZIP codes, including 58201, and across North Dakota. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.
Is it worth repairing an X5, or should I replace it?
In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.
Do X5 and X7 parts interchange?
Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.
My X5 will not prime — what do I change?
Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.
Are these genuine Graco parts?
We stock authentic Graco components only. Copy parts often cost more in the long run than they save.
How do I stop it failing again?
Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.
Magnum X5 Parts for Grand-forks, North Dakota
Painting professionals in Grand-forks, North Dakota know that downtime costs money. Sprayersandparts.com keeps your crew moving by delivering genuine Graco airless sprayer parts to the Grand-forks area (58201, 58202, 58203, 58206, and more) with same-business-day processing. We supply everything from Graco Magnum replacement tips and filters to complete Ultra Max II 1095 piston pump assemblies. Our stock also includes Graco spray hoses in 1/4" and 3/8" diameters, ranging from 25 ft to 100 ft, plus all standard Graco gun and hose fittings. Your Graco sprayer investment is protected when you use OEM parts from Sprayersandparts.com. We ship to Grand-forks daily, offer straightforward returns, and provide part-matching assistance so you order with confidence.
We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 6 Grand-forks ZIP codes (58201, 58202, 58203, 58206, 58207, 58208). Anything ordered before 1 PM CST leaves that day.
The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.
Serving North Dakota Homes and Workshops
The difference between genuine Graco parts and aftermarket copies is measurable: tighter tolerances, materials specified to Graco's engineering standards, and compatibility guaranteed for the exact model you own. Painters in Grand-forks, North Dakota who work professionally choose OEM for a reason. Painters in Grand-forks, North Dakota can rely on Sprayersandparts.com for consistent inventory, genuine Graco quality, and shipping they can track. Order today and have your parts in hand before your next job.
Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.
From small residential jobs to full commercial repaints, North Dakota contractors source Graco parts through Sprayers and Parts. We currently serve 9 communities across the state, including Bismarck, Dickinson, Fargo.Stocking direct means we hold depth on the wear items that fail first — packings, filters, tips and pressure controls — instead of ordering them in. Order before 1 PM CST for same-day dispatch and full tracking across North Dakota.
Every North Dakota order ships from the same warehouse on the same schedule.
Working outside Grand-forks? Browse every North Dakota city we ship to to find your area.
Find Us on Google
See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Grand-forks.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.