Magnum X5 Replacement Parts in Edmond
Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Edmond with no counter wait. Nearly every common failure is a stocked, inexpensive item.
Delivering across Edmond
8 ZIP codes served:
73003, 73007, 73012, 73013, 73025, 73034, 73049, 73083
What Your X5 Is Doing, and What Usually Fixes It
Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.
Will Not Prime
Most often a stuck intake ball or split suction tube.
Loses Pressure
Normally worn pump packings.
Spits or Tails
A worn tip gives fingers and tails.
Will Not Start
Control board or enclosure, once power is ruled out.
X5 parts by system
Serving Edmond and the wider Oklahoma area
- Pump repair kit — shared across X5 and X7
- Intake valve & suction set — priming faults
- Prime/spray drain valve — will not switch or leaks
- TrueAirless tips — pattern and finish problems
- Hose sets & extensions — reach and replacements
- Control board & enclosure — electrical faults
Not sure which part?
Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.
+1 713-931-4102 or browse the parts diagrams →We also ship to 8 nearby Oklahoma communities
Sapulpa, Durant, Oklahoma-city, Ponca-city, Mcalester, Moore, Duncan, Jenks
Magnum X5 Parts in Edmond — Common Questions
Straight answers for homeowners repairing their own sprayer in Edmond, Oklahoma.
Do you ship X5 parts to Edmond?
Yes — we ship to all 8 Edmond ZIP codes, including 73003, and across Oklahoma. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.
Is it worth repairing an X5, or should I replace it?
In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.
Do X5 and X7 parts interchange?
Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.
My X5 will not prime — what do I change?
Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.
Are these genuine Graco parts?
We stock authentic Graco components only. Copy parts often cost more in the long run than they save.
How do I stop it failing again?
Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.
Magnum X5 Parts for Edmond, Oklahoma
Contractors and DIY painters in Edmond, Oklahoma rely on Sprayersandparts.com for authentic Graco sprayers, spray guns, hoses, and repair kits. We serve the Edmond area (73003, 73007, 73012, 73013, and more) with fast, traceable shipping every business day. From the smallest o-ring to a complete airless pump assembly, Sprayersandparts.com stocks the parts that keep Graco sprayers running. We also carry full replacement spray guns, pressure-relief valve assemblies, motor brushes, and electronic control boards for Ultra Max and GMax models. Shop the Sprayersandparts.com catalog by sprayer model, series, or part category to find exactly what you need. We ship to Edmond quickly and include tracking on every order so you always know where your parts are.
We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 8 Edmond ZIP codes (73003, 73007, 73012, 73013, 73025, 73034, 73049, 73083). Orders placed by 1 PM CST ship the same business day.
The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.
Serving Oklahoma Homes and Workshops
Running a Graco airless sprayer in Edmond, Oklahoma means occasionally replacing wear items — tips, filters, pump packings, and inlet valve assemblies. Sourcing those from an authorized dealer ensures they're made to spec and won't void your warranty or shorten your equipment's life. Bookmark Sprayersandparts.com as your Graco source for Edmond, Oklahoma. We maintain inventory year-round, ship every business day, and can help you identify the right part number when you're not sure which component fits your specific unit.
Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.
Sprayers and Parts supplies painting contractors across Oklahoma with factory-genuine Graco equipment. Orders go out daily to 33 Oklahoma locations, including Ada, Altus, Ardmore.Running online instead of a storefront lets us hold stock most local suppliers cannot justify, right down to obsolete components for older machines still earning their keep. Orders placed before 1 PM CST ship the same business day, with tracking on every parcel.
Every Oklahoma order ships from the same warehouse on the same schedule.
Working outside Edmond? Browse every Oklahoma city we ship to to find your area.
Find Us on Google
See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Edmond.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.