Magnum X5 Replacement Parts in Jenks
Factory-original Magnum parts, so a tired X5 gets rebuilt rather than binned, dispatched to Jenks without a distributor in the middle. Most X5 faults come down to a handful of parts, and we stock all of them.
Delivering across Jenks
4 ZIP codes served:
74008, 74037, 74066, 74132
What Your X5 Is Doing, and What Usually Fixes It
The X5 tends to fail in predictable ways. The behaviour points at the part far more reliably than the diagram does. If in doubt, call us before ordering — it costs nothing to check.
Will Not Prime
Check the inlet valve and suction tube first.
Loses Pressure
Packings pass once worn, so pressure drifts.
Spits or Tails
Usually the tip or gun needle.
Will Not Start
Often an extension lead, not the machine.
X5 parts by system
Serving Jenks and the wider Oklahoma area
- Pump repair kit — shared across X5 and X7
- Intake valve & suction set — priming faults
- Prime/spray drain valve — will not switch or leaks
- TrueAirless tips — pattern and finish problems
- Hose sets & extensions — reach and replacements
- Control board & enclosure — electrical faults
Not sure which part?
Say what it does when you pull the trigger — that is usually quicker than reading part numbers off a diagram.
+1 713-931-4102 or browse the parts diagrams →We also ship to 8 nearby Oklahoma communities
Edmond, Bartlesville, Duncan, Sand-springs, Lawton, Claremore, Ardmore, Ada
Magnum X5 Parts in Jenks — Common Questions
Straight answers for homeowners repairing their own sprayer in Jenks, Oklahoma.
Do you ship X5 parts to Jenks?
Yes — we ship to all 4 Jenks ZIP codes, including 74008, and across Oklahoma. Same-day dispatch applies to orders in before 1 PM CST. Small parts go out by post, so they arrive quickly.
Is it worth repairing an X5, or should I replace it?
Nearly always worth fixing. A pump repair kit costs a small fraction of a new machine. Consider replacing if the motor is dead or the frame is damaged.
Do X5 and X7 parts interchange?
A good number are shared, including the pump kit. Guns, hoses and tips are common across the Magnum range. Body and enclosure parts differ between models. Ask us and we will check it.
My X5 will not prime — what do I change?
Start with the intake valve and the suction set. A ball stuck with old material stops it drawing entirely. If the intake is sound, move on to the pump kit.
Are these genuine Graco parts?
Every part we sell is factory-genuine Graco. Imitation seals fail early and damage the pump.
How do I stop it failing again?
The end-of-job clean is the whole maintenance routine. Store it with pump protector fluid rather than water. Most failures we supply parts for started as poor cleaning.
Magnum X5 Parts for Jenks, Oklahoma
Painting professionals in Jenks, Oklahoma know that downtime costs money. Sprayersandparts.com keeps your crew moving by delivering genuine Graco airless sprayer parts to the Jenks area (74008, 74037, 74066, 74132) with same-business-day processing. We supply everything from Graco Magnum replacement tips and filters to complete Ultra Max II 1095 piston pump assemblies. Our stock also includes Graco spray hoses in 1/4" and 3/8" diameters, ranging from 25 ft to 100 ft, plus all standard Graco gun and hose fittings. Your Graco sprayer investment is protected when you use OEM parts from Sprayersandparts.com. We ship to Jenks daily, offer straightforward returns, and provide part-matching assistance so you order with confidence.
We keep the first-to-fail items on the shelf — packings, filters, spray tips and pressure controls — and ship to all 4 Jenks ZIP codes (74008, 74037, 74066, 74132). Anything ordered before 1 PM CST leaves that day.
Worth knowing: the machine in your garage is probably fixable — the parts cost far less than people assume.
Serving Oklahoma Homes and Workshops
Airless painting in Jenks, Oklahoma demands reliable equipment. Graco's lineup — from the compact Magnum X5 to the high-volume Ultra Max II 1095 — covers every application scale, and keeping these sprayers running requires genuine OEM parts, not substitutes that can wear prematurely or fail mid-job. Painters in Jenks, Oklahoma can rely on Sprayersandparts.com for consistent inventory, genuine Graco quality, and shipping they can track. Order today and have your parts in hand before your next job.
Send your sprayer model and we will verify fitment before you buy. We stock centrally rather than locally, which is why our inventory runs deeper than a regional dealer.
Sprayers and Parts supplies painting contractors across Oklahoma with factory-genuine Graco equipment. Orders go out daily to 33 Oklahoma locations, including Ada, Altus, Ardmore.Running online instead of a storefront lets us hold stock most local suppliers cannot justify, right down to obsolete components for older machines still earning their keep. Orders placed before 1 PM CST ship the same business day, with tracking on every parcel.
Coverage is identical across Oklahoma — same inventory, same cut-off.
Working outside Jenks? Browse every Oklahoma city we ship to to find your area.
Find Us on Google
View verified reviews and how to reach us on our Google Business Profile — then order online for delivery to Jenks.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.