Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
Canby, Oregon

Magnum X5 Replacement Parts in Canby

Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Canby with no counter wait. Nearly every common failure is a stocked, inexpensive item.

Fast Shipping
Order by 1 PM CST
100% OEM
Never aftermarket
Shared Kits
X5 and X7 use the same pump kit

Pump, suction, gun, electrical — and the machine itself

Find it by symptom

What Your X5 Is Doing, and What Usually Fixes It

Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.

Will Not Prime

Most often a stuck intake ball or split suction tube.

Loses Pressure

Normally worn pump packings.

Spits or Tails

A worn tip gives fingers and tails.

Will Not Start

Control board or enclosure, once power is ruled out.

X5 parts by system

Serving Canby and the wider Oregon area

Not sure which part?

Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.

+1 713-931-4102 or browse the parts diagrams →

Magnum X5 Parts in Canby — Common Questions

Straight answers for homeowners repairing their own sprayer in Canby, Oregon.

Do you ship X5 parts to Canby?

Yes — we ship to all 1 Canby ZIP codes, including 97013, and across Oregon. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.

Is it worth repairing an X5, or should I replace it?

In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.

Do X5 and X7 parts interchange?

Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.

My X5 will not prime — what do I change?

Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.

Are these genuine Graco parts?

We stock authentic Graco components only. Copy parts often cost more in the long run than they save.

How do I stop it failing again?

Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.

Magnum X5 Parts for Canby, Oregon

From residential painters to large commercial crews, customers in Canby, Oregon count on Sprayersandparts.com for the full range of Graco spray equipment. We stock OEM parts and complete sprayers and ship to Canby (97013) fast. Whether you need a Graco Blue RAC X tip for fine finish work, a SwitchTip for reversible unclogging, or a FFLP tip for latex paints, we have your size. We also stock tip extension poles, whip hoses, pressure gauges, and gun repair kits for all Graco models. Order before 2 PM and most in-stock items ship the same business day. Sprayersandparts.com offers straightforward returns and knowledgeable support if you need help identifying the right part for your Graco model.

We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 1 Canby ZIP codes (97013). Order by 1 PM CST and it ships same day, tracked.

The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Genuine Graco, never aftermarket
Shared Kits
X5 and X7 pump kit in common
1 ZIPs
Covered in Canby alone

Serving Oregon Homes and Workshops

Graco has built its reputation on consistent, high-quality airless spray technology. For painters working in Canby, Oregon, that reputation matters — on large commercial projects where downtime is costly and on residential jobs where finish quality is everything. Painters in Canby, Oregon can rely on Sprayersandparts.com for consistent inventory, genuine Graco quality, and shipping they can track. Order today and have your parts in hand before your next job.

Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.

Across Oregon, painting crews and property maintenance teams order their Graco parts from Sprayers and Parts. Our Oregon coverage spans 46 cities and towns — among them Albany, Aloha, Altamont.We are a direct shipper rather than a walk-in store, which is exactly why we can carry the slow-moving and superseded parts that keep older sprayers running. Same-day dispatch applies to orders in before 1 PM CST, tracked the whole way.

Every Oregon order ships from the same warehouse on the same schedule.

Working outside Canby? Browse every Oregon city we ship to to find your area.

Find Us on Google

See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Canby.

View Our Google Profile
+1 713-931-4102
Fast shipping to Canby 97013

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
“Needed a replacement 17A226 FlexLiner Bags 32 oz 3 pack, part number 17A226, and the machine was back up and running the same day. Easy to order once I had the part number from the diagram.”
Verified Buyer · Part #17A226
“Ordered the 17C828 Label, Brand, Ultramaxii, 490, Bttm (17C828) for our crew - it fit perfectly with no modifications needed. Good value for a genuine Graco part.”
Verified Buyer · Part #17C828
“The 288136 Fluid Seal Repair Kit for G40 Air-Assisted Spray Guns (Part #288136) - it's holding up well after regular use on the job. No issues at all - does exactly what it should.”
Verified Buyer · Part #288136
“Needed a replacement 16F151 Fitting Elbow Swivel 3/8T 3/8NPT, part number 16F151, and the fit and finish were spot on, no surprises. Glad we found the exact part number we needed.”
Verified Buyer · Part #16F151
“Ordered the 196179 Street Elbow Fitting (196179) for our crew - it's been reliable through several jobs since. Easy to order once I had the part number from the diagram.”
Verified Buyer · Part #196179
“Ordered the 288192 Kit Diffuser Assy (288192) for our crew - it fit perfectly with no modifications needed. Good value for a genuine Graco part.”
Verified Buyer · Part #288192
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart