Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
Buda, Texas

Magnum X5 Replacement Parts in Buda

Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Buda with no counter wait. Nearly every common failure is a stocked, inexpensive item.

Fast Shipping
Order by 1 PM CST
100% OEM
Never aftermarket
Shared Kits
X5 and X7 use the same pump kit

Pump, suction, gun, electrical — and the machine itself

Find it by symptom

What Your X5 Is Doing, and What Usually Fixes It

Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.

Will Not Prime

Most often a stuck intake ball or split suction tube.

Loses Pressure

Normally worn pump packings.

Spits or Tails

A worn tip gives fingers and tails.

Will Not Start

Control board or enclosure, once power is ruled out.

X5 parts by system

Serving Buda and the wider Texas area

Not sure which part?

Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.

+1 713-931-4102 or browse the parts diagrams →

We also ship to 8 nearby Texas communities

Coppell, Southlake, Horizon-city, Donna, Tyler, Corinth, Bryan, Garland

See every Texas city we serve →

Magnum X5 Parts in Buda — Common Questions

Straight answers for homeowners repairing their own sprayer in Buda, Texas.

Do you ship X5 parts to Buda?

Yes — we ship to all 1 Buda ZIP codes, including 78610, and across Texas. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.

Is it worth repairing an X5, or should I replace it?

In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.

Do X5 and X7 parts interchange?

Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.

My X5 will not prime — what do I change?

Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.

Are these genuine Graco parts?

We stock authentic Graco components only. Copy parts often cost more in the long run than they save.

How do I stop it failing again?

Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.

Magnum X5 Parts for Buda, Texas

Serving Buda, Texas (78610) and neighboring communities, Sprayersandparts.com offers the complete lineup of Graco airless paint sprayers, HVLP guns, texture sprayers, and OEM replacement parts at competitive prices. Our catalog includes Graco Magnum X5, X7, ProX19, ProX17, FinishPro HVLP sprayers, Ultra Max II 695, 795 and 1095, and Mark V and Mark X contractor sprayers, plus the full range of Graco repair kits, pump packings, filters, spray tips, tip guards, hoses, and gun parts. Every part we sell is OEM — no aftermarket substitutes. Fast shipping, OEM quality, and straightforward customer service — that's what Buda customers get when they shop at Sprayersandparts.com. Search by model or part number to find exactly what your Graco sprayer needs.

We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 1 Buda ZIP codes (78610). Order by 1 PM CST and it ships same day, tracked.

The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Genuine Graco, never aftermarket
Shared Kits
X5 and X7 pump kit in common
1 ZIPs
Covered in Buda alone

Serving Texas Homes and Workshops

Running a Graco airless sprayer in Buda, Texas means occasionally replacing wear items — tips, filters, pump packings, and inlet valve assemblies. Sourcing those from an authorized dealer ensures they're made to spec and won't void your warranty or shorten your equipment's life. Sprayersandparts.com is committed to keeping Buda, Texas painters productive. Genuine Graco parts, fast order processing, and knowledgeable support mean you spend less time sourcing and more time painting.

Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.

Texas painters rely on Sprayers and Parts for authentic Graco sprayers, guns and replacement components. We deliver to 190 cities statewide, from Abilene, Addison, Alamo and beyond.Because we operate online rather than through a trade counter, our inventory runs far deeper than a regional dealer — including legacy and discontinued Graco part numbers going back two decades. Anything ordered by 1 PM CST leaves the warehouse that day and is tracked to your door.

Every Texas order ships from the same warehouse on the same schedule.

Working outside Buda? Browse every Texas city we ship to to find your area.

Find Us on Google

See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Buda.

View Our Google Profile
+1 713-931-4102
Fast shipping to Buda 78610

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
“The 195177 TSL and Suction Holder (Part #195177) - installation took less than ten minutes. Would order again without hesitation.”
Verified Buyer · Part #195177
“Ordered this for a job and for the 246240 Silver Plus Airless Spray Gun (Part #246240) and it matched the original spec exactly, down to the part number. No issues at all - does exactly what it should.”
Verified Buyer · Part #246240
“Needed this fast for an active job site - for the 26C142 Piston Motor Repair Kit (Part #26C142) and it's holding up well after regular use on the job. Customer support was helpful when I had questions about fit.”
Verified Buyer · Part #26C142
“Wasn't sure about the fit at first, but this 15R406 Label, Prostart Sys, Linedriver and the machine was back up and running the same day. Part #15R406 matched exactly. No issues at all - does exactly what it should.”
Verified Buyer · Part #15R406
KP
“This was a straightforward swap - for the 107079 O-Ring Packing (Part #107079) and the fit and finish were spot on, no surprises. Customer support was helpful when I had questions about fit.”
Verified Buyer · Part #107079
“Picked this up to replace a worn part and for the AXP713 Performaa Precision Spray Tip (Part #AXP713) and the build quality matched what we expect from genuine Graco parts. Would order again without hesitation.”
Verified Buyer · Part #AXP713
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart