Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
Houston, Texas

Magnum X5 Replacement Parts in Houston

Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Houston with no counter wait. Nearly every common failure is a stocked, inexpensive item.

Fast Shipping
Order by 1 PM CST
100% OEM
Never aftermarket
Shared Kits
X5 and X7 use the same pump kit

Delivering across Houston

232 ZIP codes served:
77001, 77002, 77003, 77004, 77005, 77006, 77007, 77008, 77009, 77010, 77011, 77012

Pump, suction, gun, electrical — and the machine itself

Find it by symptom

What Your X5 Is Doing, and What Usually Fixes It

Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.

Will Not Prime

Most often a stuck intake ball or split suction tube.

Loses Pressure

Normally worn pump packings.

Spits or Tails

A worn tip gives fingers and tails.

Will Not Start

Control board or enclosure, once power is ruled out.

X5 parts by system

Serving Houston and the wider Texas area

Not sure which part?

Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.

+1 713-931-4102 or browse the parts diagrams →

Magnum X5 Parts in Houston — Common Questions

Straight answers for homeowners repairing their own sprayer in Houston, Texas.

Do you ship X5 parts to Houston?

Yes — we ship to all 232 Houston ZIP codes, including 77001, and across Texas. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.

Is it worth repairing an X5, or should I replace it?

In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.

Do X5 and X7 parts interchange?

Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.

My X5 will not prime — what do I change?

Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.

Are these genuine Graco parts?

We stock authentic Graco components only. Copy parts often cost more in the long run than they save.

How do I stop it failing again?

Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.

Magnum X5 Parts for Houston, Texas

Sprayersandparts.com is your online source for Graco airless sprayers, spray guns, hoses, and genuine OEM repair parts in Houston, Texas. We process orders daily and ship throughout the Houston area (77001, 77002, 77003, 77004, and more). Our catalog extends beyond parts: we carry complete Graco airless sprayer packages, HVLP turbine and spray gun systems, texture sprayer setups, and line striping equipment — everything a painting contractor in Texas needs to stay productive. Sprayersandparts.com stands behind every order with responsive customer support. If you're unsure which part fits your model, contact us with your sprayer's serial number and we'll confirm compatibility before you buy.

We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 232 Houston ZIP codes (77001, 77002, 77003, 77004, 77005, 77006, 77007, 77008, 77009, 77010, 77011, 77012). Anything ordered before 1 PM CST leaves that day.

The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Genuine Graco, never aftermarket
Shared Kits
X5 and X7 pump kit in common
232 ZIPs
Covered in Houston alone

Serving Texas Homes and Workshops

Graco's service life depends heavily on correct maintenance and genuine parts. For Houston, Texas painters who rely on their sprayers daily, keeping a stock of key OEM components — tips, filters, and a piston pump repair kit — is standard professional practice. For Houston, Texas painting professionals, Sprayersandparts.com is the straightforward solution: genuine Graco parts, a full sprayer catalog, fast shipping, and support when you need help identifying what your sprayer needs.

Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.

Texas painters rely on Sprayers and Parts for authentic Graco sprayers, guns and replacement components. We deliver to 190 cities statewide, from Abilene, Addison, Alamo and beyond.Because we operate online rather than through a trade counter, our inventory runs far deeper than a regional dealer — including legacy and discontinued Graco part numbers going back two decades. Anything ordered by 1 PM CST leaves the warehouse that day and is tracked to your door.

Every Texas order ships from the same warehouse on the same schedule.

Working outside Houston? Browse every Texas city we ship to to find your area.

Find Us on Google

See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Houston.

View Our Google Profile
+1 713-931-4102
Fast shipping to Houston 77001

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
“Ordered the 15J363 Reservoir Cover (15J363) for our crew - the build quality matched what we expect from genuine Graco parts. No issues at all - does exactly what it should.”
Verified Buyer · Part #15J363
“Needed a replacement 120788 Carriage Screw, part number 120788, and shipping was quick and the part was packaged well. Exactly what was described - no complaints.”
Verified Buyer · Part #120788
“The 16X904 3/8-Inch ID Coupled Hose (Part #16X904) - it fit perfectly with no modifications needed. Customer support was helpful when I had questions about fit.”
Verified Buyer · Part #16X904
“Ordered this for a job and for the 287285 Manifold Filter Cap (Part #287285) and it's been reliable through several jobs since. Glad we found the exact part number we needed.”
Verified Buyer · Part #287285
“Needed a replacement 172056 Retainer Spring, part number 172056, and it matched the original spec exactly, down to the part number. Easy to order once I had the part number from the diagram.”
Verified Buyer · Part #172056
“This was a straightforward swap - this 17C909 Harness, Cable, G3000 16" and the build quality matched what we expect from genuine Graco parts. Part #17C909 matched exactly. No issues at all - does exactly what it should.”
Verified Buyer · Part #17C909
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart