Magnum X5 Replacement Parts in Brigham-city
Genuine Graco spares to get an X5 running again — pump kits, suction sets, guns and control parts, sent straight to Brigham-city from our own shelves. A repack usually costs a fraction of a replacement machine.
Delivering across Brigham-city
1 ZIP codes served:
84302
What Your X5 Is Doing, and What Usually Fixes It
Most Magnum faults fall into a small number of patterns. Start with what it is doing, not with the parts list. A two-minute call usually saves a wrong part.
Will Not Prime
Usually the intake valve or suction set.
Loses Pressure
The pump repair kit covers this.
Spits or Tails
Tip wear or a tired gun seat.
Will Not Start
Check the supply first, then the control board.
X5 parts by system
Serving Brigham-city and the wider Utah area
- Pump repair kit — shared across X5 and X7
- Intake valve & suction set — priming faults
- Prime/spray drain valve — will not switch or leaks
- TrueAirless tips — pattern and finish problems
- Hose sets & extensions — reach and replacements
- Control board & enclosure — electrical faults
Not sure which part?
Tell us the symptom and the model — we can normally name the part from the behaviour alone.
+1 713-931-4102 or browse the parts diagrams →We also ship to 8 nearby Utah communities
Tooele, West-valley-city, South-ogden, Payson, Murray, Provo, Lehi, Saratoga-springs
Magnum X5 Parts in Brigham-city — Common Questions
Straight answers for homeowners repairing their own sprayer in Brigham-city, Utah.
Do you ship X5 parts to Brigham-city?
Yes — we ship to all 1 Brigham-city ZIP codes, including 84302, and across Utah. Orders placed by 1 PM CST ship the same business day. Small parts go out by post, so they arrive quickly.
Is it worth repairing an X5, or should I replace it?
Usually repair — the economics favour it heavily. Most repairs come to far less than a new unit. Replacement only really makes sense if the housing is cracked or the motor has failed outright.
Do X5 and X7 parts interchange?
Largely yes; the main pump kit is listed for X5 and X7 together. Most accessories fit the whole Magnum family. Enclosure and housing parts are model specific, so check those. We will verify fit against your exact unit.
My X5 will not prime — what do I change?
Usually the intake ball is stuck or the suction tube has split. Dried paint holding the intake ball on its seat is the most common cause of all. Failing that, look at the packings.
Are these genuine Graco parts?
All parts are original Graco, never aftermarket copies. Aftermarket packings wear differently and can score the cylinder.
How do I stop it failing again?
Flush it thoroughly straight after use. Pump protector stops the packings drying out between jobs. Almost every part we sell for these machines is replacing damage caused by dried paint.
Magnum X5 Parts for Brigham-city, Utah
Whether you're spray-painting walls, ceilings, or exterior surfaces, Sprayersandparts.com provides Brigham-city, Utah customers with authentic Graco equipment and parts. Orders to Brigham-city (84302) ship same or next business day. From Graco Magnum X5 homeowner sprayers to Ultra Max II 1095 Hi-Boy contractor units, Sprayersandparts.com covers the full product range. Parts for every model — pump kits, drive housing assemblies, pressure relief valves, tip filters, and gun components — are in stock and ready to ship. We back every order with easy returns and parts-matching support. Shopping with Sprayersandparts.com means access to genuine Graco quality, fast shipping to Brigham-city, and real help when you need it.
We carry real depth on fast-wearing components — packings, filters, spray tips and pressure controls — and ship to all 1 Brigham-city ZIP codes (84302). Same-day dispatch on orders in before 1 PM CST.
Why it matters: most X5s written off as dead need an intake valve and an hour — usually for less than the price of the paint you were going to spray.
Serving Utah Homes and Workshops
For Brigham-city, Utah painting contractors, equipment reliability directly affects project schedules and profitability. A worn pump packing, a clogged filter, or a damaged spray tip can stop a crew in its tracks. Stocking a few key Graco OEM replacement parts prevents that scenario. Bookmark Sprayersandparts.com as your Graco source for Brigham-city, Utah. We maintain inventory year-round, ship every business day, and can help you identify the right part number when you're not sure which component fits your specific unit.
Tell us your model and serial number and we will confirm the exact part before you order. We ship direct instead of running a counter, which lets us hold parts for machines twenty years old.
From small residential jobs to full commercial repaints, Utah contractors source Graco parts through Sprayers and Parts. Orders go out daily to 48 Utah locations, including American Fork, Bountiful, Brigham City.Running online instead of a storefront lets us hold stock most local suppliers cannot justify, right down to obsolete components for older machines still earning their keep. Orders placed before 1 PM CST ship the same business day, with tracking on every parcel.
Wherever you are in Utah, the same stock and the same dispatch times apply.
Working outside Brigham-city? Browse every Utah city we ship to to find your area.
Find Us on Google
Check our profile, ratings and opening hours on our Google Business Profile — then order online for delivery to Brigham-city.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.