Magnum X5 Replacement Parts in Monroe
Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Monroe with no counter wait. Nearly every common failure is a stocked, inexpensive item.
Delivering across Monroe
2 ZIP codes served:
98272, 98290
What Your X5 Is Doing, and What Usually Fixes It
Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.
Will Not Prime
Most often a stuck intake ball or split suction tube.
Loses Pressure
Normally worn pump packings.
Spits or Tails
A worn tip gives fingers and tails.
Will Not Start
Control board or enclosure, once power is ruled out.
X5 parts by system
Serving Monroe and the wider Washington area
- Pump repair kit — shared across X5 and X7
- Intake valve & suction set — priming faults
- Prime/spray drain valve — will not switch or leaks
- TrueAirless tips — pattern and finish problems
- Hose sets & extensions — reach and replacements
- Control board & enclosure — electrical faults
Not sure which part?
Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.
+1 713-931-4102 or browse the parts diagrams →We also ship to 8 nearby Washington communities
Oak-harbor, Union-hill-novelty-hill, Shoreline, Martha-lake, Bonney-lake, Lacey, Lake-stevens, Kirkland
Magnum X5 Parts in Monroe — Common Questions
Straight answers for homeowners repairing their own sprayer in Monroe, Washington.
Do you ship X5 parts to Monroe?
Yes — we ship to all 2 Monroe ZIP codes, including 98272, and across Washington. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.
Is it worth repairing an X5, or should I replace it?
In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.
Do X5 and X7 parts interchange?
Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.
My X5 will not prime — what do I change?
Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.
Are these genuine Graco parts?
We stock authentic Graco components only. Copy parts often cost more in the long run than they save.
How do I stop it failing again?
Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.
Magnum X5 Parts for Monroe, Washington
Need Graco sprayer parts in Monroe, Washington? Sprayersandparts.com stocks thousands of OEM Graco components — from Magnum X5 and X7 parts to Pro and Ultra Max II repair kits — and ships them straight to Monroe (98272, 98290). Our Graco parts inventory covers every major series: Magnum (residential), ProX and Ultra Max II (contractor), GMax and King (heavy-duty commercial), Plus HVLP and FinishPro (fine-finish), and TrueCoat (handheld). We stock OEM tips, filters, guns, hoses, and full repair kits for all of them. Sprayersandparts.com makes it easy for Monroe painters to keep their Graco equipment in top condition. Browse by part type or sprayer model, add to cart, and your genuine OEM parts will be on their way to Monroe the same day.
We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 2 Monroe ZIP codes (98272, 98290). Orders placed by 1 PM CST ship the same business day.
The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.
Serving Washington Homes and Workshops
Graco airless sprayers are the professional standard for a reason: consistent pressure, fine atomization, and the ability to handle everything from thin stains to heavy latex coatings. In Monroe, Washington, contractors and property owners who paint frequently know that keeping their sprayer in top shape is what separates a smooth job from a frustrating one. Painters in Monroe, Washington can rely on Sprayersandparts.com for consistent inventory, genuine Graco quality, and shipping they can track. Order today and have your parts in hand before your next job.
Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.
Across Washington, painting crews and property maintenance teams order their Graco parts from Sprayers and Parts. We deliver to 87 cities statewide, from Aberdeen, Anacortes, Arlington and beyond.Because we operate online rather than through a trade counter, our inventory runs far deeper than a regional dealer — including legacy and discontinued Graco part numbers going back two decades. Anything ordered by 1 PM CST leaves the warehouse that day and is tracked to your door.
Every Washington order ships from the same warehouse on the same schedule.
Working outside Monroe? Browse every Washington city we ship to to find your area.
Find Us on Google
See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Monroe.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.