Magnum X5 Replacement Parts in Vancouver
Factory-original Magnum parts, so a tired X5 gets rebuilt rather than binned, dispatched to Vancouver without a distributor in the middle. Most X5 faults come down to a handful of parts, and we stock all of them.
Delivering across Vancouver
12 ZIP codes served:
98607, 98660, 98661, 98662, 98663, 98664, 98665, 98667, 98682, 98683, 98684, 98687
What Your X5 Is Doing, and What Usually Fixes It
The X5 tends to fail in predictable ways. The behaviour points at the part far more reliably than the diagram does. If in doubt, call us before ordering — it costs nothing to check.
Will Not Prime
Check the inlet valve and suction tube first.
Loses Pressure
Packings pass once worn, so pressure drifts.
Spits or Tails
Usually the tip or gun needle.
Will Not Start
Often an extension lead, not the machine.
X5 parts by system
Serving Vancouver and the wider Washington area
- Pump repair kit — shared across X5 and X7
- Intake valve & suction set — priming faults
- Prime/spray drain valve — will not switch or leaks
- TrueAirless tips — pattern and finish problems
- Hose sets & extensions — reach and replacements
- Control board & enclosure — electrical faults
Not sure which part?
Say what it does when you pull the trigger — that is usually quicker than reading part numbers off a diagram.
+1 713-931-4102 or browse the parts diagrams →We also ship to 8 nearby Washington communities
Silver-firs, Edmonds, Camas, North-creek, Redmond, Mukilteo, Arlington, Bainbridge-island
Magnum X5 Parts in Vancouver — Common Questions
Straight answers for homeowners repairing their own sprayer in Vancouver, Washington.
Do you ship X5 parts to Vancouver?
Yes — we ship to all 12 Vancouver ZIP codes, including 98607, and across Washington. Same-day dispatch applies to orders in before 1 PM CST. Small parts go out by post, so they arrive quickly.
Is it worth repairing an X5, or should I replace it?
Nearly always worth fixing. A pump repair kit costs a small fraction of a new machine. Consider replacing if the motor is dead or the frame is damaged.
Do X5 and X7 parts interchange?
A good number are shared, including the pump kit. Guns, hoses and tips are common across the Magnum range. Body and enclosure parts differ between models. Ask us and we will check it.
My X5 will not prime — what do I change?
Start with the intake valve and the suction set. A ball stuck with old material stops it drawing entirely. If the intake is sound, move on to the pump kit.
Are these genuine Graco parts?
Every part we sell is factory-genuine Graco. Imitation seals fail early and damage the pump.
How do I stop it failing again?
The end-of-job clean is the whole maintenance routine. Store it with pump protector fluid rather than water. Most failures we supply parts for started as poor cleaning.
Magnum X5 Parts for Vancouver, Washington
Vancouver, Washington professionals trust Sprayersandparts.com for factory-genuine Graco parts and equipment. Whether you need a replacement pump, tip, filter, or a complete airless sprayer, we ship to Vancouver (98607, 98660, 98661, 98662, and more) quickly and reliably. Professional painters in Washington choose Sprayersandparts.com because we maintain deep stock of Graco's most commonly replaced parts: RAC X tips, pump repair kits, gun filters, suction tubes, and hose assemblies — so you're never waiting weeks for back-ordered items. Choosing genuine Graco parts means your sprayer performs as Graco intended — consistent pressure, reliable atomization, and a longer service life. Order from Sprayersandparts.com today and receive your parts in Vancouver without the hassle of searching multiple suppliers.
We keep the first-to-fail items on the shelf — packings, filters, spray tips and pressure controls — and ship to all 12 Vancouver ZIP codes (98607, 98660, 98661, 98662, 98663, 98664, 98665, 98667, 98682, 98683, 98684, 98687). Order by 1 PM CST and it ships same day, tracked.
Worth knowing: the machine in your garage is probably fixable — the parts cost far less than people assume.
Serving Washington Homes and Workshops
Paint sprayer performance comes down to parts quality. In Vancouver, Washington, professionals who have switched to genuine Graco OEM components report fewer pressure drops, longer pump life, and better tip-to-tip consistency than those who rely on aftermarket alternatives. Painters in Vancouver, Washington can rely on Sprayersandparts.com for consistent inventory, genuine Graco quality, and shipping they can track. Order today and have your parts in hand before your next job.
Send your sprayer model and we will verify fitment before you buy. We stock centrally rather than locally, which is why our inventory runs deeper than a regional dealer.
Across Washington, painting crews and property maintenance teams order their Graco parts from Sprayers and Parts. We deliver to 87 cities statewide, from Aberdeen, Anacortes, Arlington and beyond.Because we operate online rather than through a trade counter, our inventory runs far deeper than a regional dealer — including legacy and discontinued Graco part numbers going back two decades. Anything ordered by 1 PM CST leaves the warehouse that day and is tracked to your door.
Coverage is identical across Washington — same inventory, same cut-off.
Working outside Vancouver? Browse every Washington city we ship to to find your area.
Find Us on Google
View verified reviews and how to reach us on our Google Business Profile — then order online for delivery to Vancouver.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.
Small part but exactly what I needed. Fit perfectly, installed easily, and feels durable. Got my cutter assembly working like it should again. Good quality genuine Graco part.
”