Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
Green-bay, Wisconsin

Magnum X5 Replacement Parts in Green-bay

Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Green-bay with no counter wait. Nearly every common failure is a stocked, inexpensive item.

Fast Shipping
Order by 1 PM CST
100% OEM
Never aftermarket
Shared Kits
X5 and X7 use the same pump kit

Delivering across Green-bay

14 ZIP codes served:
54155, 54229, 54301, 54302, 54303, 54304, 54305, 54306, 54307, 54308, 54311, 54313

Pump, suction, gun, electrical — and the machine itself

Find it by symptom

What Your X5 Is Doing, and What Usually Fixes It

Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.

Will Not Prime

Most often a stuck intake ball or split suction tube.

Loses Pressure

Normally worn pump packings.

Spits or Tails

A worn tip gives fingers and tails.

Will Not Start

Control board or enclosure, once power is ruled out.

X5 parts by system

Serving Green-bay and the wider Wisconsin area

Not sure which part?

Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.

+1 713-931-4102 or browse the parts diagrams →

Magnum X5 Parts in Green-bay — Common Questions

Straight answers for homeowners repairing their own sprayer in Green-bay, Wisconsin.

Do you ship X5 parts to Green-bay?

Yes — we ship to all 14 Green-bay ZIP codes, including 54155, and across Wisconsin. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.

Is it worth repairing an X5, or should I replace it?

In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.

Do X5 and X7 parts interchange?

Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.

My X5 will not prime — what do I change?

Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.

Are these genuine Graco parts?

We stock authentic Graco components only. Copy parts often cost more in the long run than they save.

How do I stop it failing again?

Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.

Magnum X5 Parts for Green-bay, Wisconsin

Serving Green-bay, Wisconsin (54155, 54229, 54301, 54302, and more) and neighboring communities, Sprayersandparts.com offers the complete lineup of Graco airless paint sprayers, HVLP guns, texture sprayers, and OEM replacement parts at competitive prices. Our catalog includes Graco Magnum X5, X7, ProX19, ProX17, FinishPro HVLP sprayers, Ultra Max II 695, 795 and 1095, and Mark V and Mark X contractor sprayers, plus the full range of Graco repair kits, pump packings, filters, spray tips, tip guards, hoses, and gun parts. Every part we sell is OEM — no aftermarket substitutes. Fast shipping, OEM quality, and straightforward customer service — that's what Green-bay customers get when they shop at Sprayersandparts.com. Search by model or part number to find exactly what your Graco sprayer needs.

We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 14 Green-bay ZIP codes (54155, 54229, 54301, 54302, 54303, 54304, 54305, 54306, 54307, 54308, 54311, 54313). Order by 1 PM CST and it ships same day, tracked.

The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Genuine Graco, never aftermarket
Shared Kits
X5 and X7 pump kit in common
14 ZIPs
Covered in Green-bay alone

Serving Wisconsin Homes and Workshops

Graco has built its reputation on consistent, high-quality airless spray technology. For painters working in Green-bay, Wisconsin, that reputation matters — on large commercial projects where downtime is costly and on residential jobs where finish quality is everything. Sprayersandparts.com is committed to keeping Green-bay, Wisconsin painters productive. Genuine Graco parts, fast order processing, and knowledgeable support mean you spend less time sourcing and more time painting.

Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.

From small residential jobs to full commercial repaints, Wisconsin contractors source Graco parts through Sprayers and Parts. Our Wisconsin coverage spans 55 cities and towns — among them Appleton, Ashwaubenon, Beaver Dam.We are a direct shipper rather than a walk-in store, which is exactly why we can carry the slow-moving and superseded parts that keep older sprayers running. Same-day dispatch applies to orders in before 1 PM CST, tracked the whole way.

Every Wisconsin order ships from the same warehouse on the same schedule.

Working outside Green-bay? Browse every Wisconsin city we ship to to find your area.

Find Us on Google

See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Green-bay.

View Our Google Profile
+1 713-931-4102
Fast shipping to Green-bay 54155

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
“The 235486 180 Degree Directional Spray Adapter (Part #235486) - it's holding up well after regular use on the job. Saved us a trip to the dealer.”
Verified Buyer · Part #235486
“Bought this after the original wore out, and this 287735 Brush Repair Kit and it matched the original spec exactly, down to the part number. Part #287735 matched exactly. Would order again without hesitation.”
Verified Buyer · Part #287735
“Our crew has used a few of these now and this 24H323 Grindlazer 480 Clutch Kit and the machine was back up and running the same day. Part #24H323 matched exactly. This is now our go-to for replacement parts.”
Verified Buyer · Part #24H323
“Needed a replacement 124249 Ceramic Ball - Si-N, part number 124249, and it's holding up well after regular use on the job. Easy to order once I had the part number from the diagram.”
Verified Buyer · Part #124249
“Needed a replacement 17C725 Pressure Control Indicator, part number 17C725, and it fit perfectly with no modifications needed. Exactly what was described - no complaints.”
Verified Buyer · Part #17C725
“Grabbed one of these on a recommendation, and this 257425 O-Ring Kit, 6 Pack and the machine was back up and running the same day. Part #257425 matched exactly. Glad we found the exact part number we needed.”
Verified Buyer · Part #257425
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart