Graco 1095 Filter Sprayer Parts List

Authentic Graco 1095 Filter Sprayer Parts

Nothing kills productivity faster than an unexpected clog, blown seal, or worn-out filter. Professional contractors and maintenance crews depend on the Graco Ultra Max II 1095 a 2.4 HP, 3300 psi (22.8 MPa) workhorse that moves up to 1.2 gpm. Keep yours spraying like new with genuine Graco 1095 Filter Sprayer Parts delivered direct from SprayersAndParts.com. We stock every factory-authorized graco filter, pump, o-ring, and gasket you need.

Power Up Your Projects with Genuine Graco 1095 Filter Sprayer Solutions

The 1095’s proprietary Easy-Out filtration system protects its Endurance pump from abrasive trash, while a high-capacity displacement pump powers up to three guns at once. Swapping in off-brand parts risks pressure spikes, premature packing wear, and costly downtime. Our OEM filter kits 60 mesh blue for latex and 100 mesh black for stains are certified for 695, 795, 1095, and 1595 sprayers, as well as gasoline GMax II rigs.

Why Choose Genuine 1095 Parts Over After-Market Copies?

• Tight machining tolerances maintain volumetric consistency at 3300 psi critical for fire-retardants, epoxy floors, and fine-finish lacquers.
• Verified chemical compatibility across water-borne, solvent-borne, and high-build elastomerics no mystery alloys that swell packings.
• Sleeved Endurance Chromex pump option (17C487) swaps in minutes and lasts 2× longer than chrome-plated imports.
• Full Graco warranty.

Key Specs at a Glance

Compatible Machines & Retrofits

The same Easy-Out manifold filter platform fits a surprisingly wide fleet of Graco rigs, making your parts cabinet simpler and leaner:

• Ultra Max II 695 / 795 / 1095 / 1595—identical filter cavity; use the color-coded Easy-Out screens.
• GMax II 7900 (16W883 series)—gas model for heavy elastomeric roofs; filter kits and packing sets interchange.
• LineLazer IV 3900 & 5900—stripers share the same 3300 psi pump architecture; manifold filters drop straight in.
• 390 PC / Ultra 395 PC / Ultra Max II 490-595 PC Pro—carry a spare Endurance pump to slash downtime on job-site repairs.
• Graco TrueCoat 360 Electric TrueAirless Sprayer cups, tips, and prime valves perfect add-ons for punch-list touch-ups where hauling the 1095 isn’t feasible. 

Cross-Sell Accessories for a Complete System

Because every sprayer is only as reliable as its soft-wear parts, we bundle the most-requested spares into easy “job-box” kits:

1. graco 390 pc pump repair kit : pre-assembled rod, sleeve, and packings drop in with a ¾-inch wrench no press needed. 
2. graco spray tip guards: RAC X blue guard protects tips from kick-back and finger injuries; fits every LineLazer, GMax, and 1095 gun we ship.
3. graco spray pump parts: suction set with new Viton washer, garden-hose gasket, and stainless strainer refreshes suction efficiency. 
4. Quick-swap graco cordless paint sprayer parts FlexLiner bags, 17A402 prime/spray valves, and 17A223 tips keep your handheld TrueCoat spraying flawless touch-ups. 

Maintenance Tips to Maximize Pump Life

Document wear intervals  log hours & material type; packings on acrylics typically last ~500 gallons, but solvent urethanes may halve that.

Flush smart run warm water or compatible solvent at half pressure after every shift. A clean filter traps debris before it scars the piston.

Stock redundancy  carry one spare filter per crew per day 30 seconds to swap a screen beats losing an afternoon to tip clogs or pump stall.

Color-code bins  blue = 60 mesh, black = 100 mesh, yellow = 150 mesh so your apprentice can grab the right screen without guessing.

Ready to Order?

Hit Add to Cart, choose your shipping speed, and feel the difference genuine parts make on tomorrow’s jobsite. Your electric airless paint sprayer will thank you and so will your bottom line.

© 2025 SprayersAndParts.com