Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
Phoenix, Arizona

Magnum X5 Replacement Parts in Phoenix

Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Phoenix with no counter wait. Nearly every common failure is a stocked, inexpensive item.

Fast Shipping
Order by 1 PM CST
100% OEM
Never aftermarket
Shared Kits
X5 and X7 use the same pump kit

Delivering across Phoenix

97 ZIP codes served:
85001, 85002, 85003, 85004, 85005, 85006, 85007, 85008, 85009, 85010, 85011, 85012

Pump, suction, gun, electrical — and the machine itself

Find it by symptom

What Your X5 Is Doing, and What Usually Fixes It

Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.

Will Not Prime

Most often a stuck intake ball or split suction tube.

Loses Pressure

Normally worn pump packings.

Spits or Tails

A worn tip gives fingers and tails.

Will Not Start

Control board or enclosure, once power is ruled out.

X5 parts by system

Serving Phoenix and the wider Arizona area

Not sure which part?

Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.

+1 713-931-4102 or browse the parts diagrams →

Magnum X5 Parts in Phoenix — Common Questions

Straight answers for homeowners repairing their own sprayer in Phoenix, Arizona.

Do you ship X5 parts to Phoenix?

Yes — we ship to all 97 Phoenix ZIP codes, including 85001, and across Arizona. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.

Is it worth repairing an X5, or should I replace it?

In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.

Do X5 and X7 parts interchange?

Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.

My X5 will not prime — what do I change?

Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.

Are these genuine Graco parts?

We stock authentic Graco components only. Copy parts often cost more in the long run than they save.

How do I stop it failing again?

Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.

Magnum X5 Parts for Phoenix, Arizona

Sprayersandparts.com supplies Phoenix, Arizona with authentic Graco airless sprayers and OEM parts. From simple filters and tips to complete pump rebuild kits, every item ships directly to Phoenix (85001, 85002, 85003, 85004, and more) — no waiting on a local distributor. Our inventory covers Graco's entire residential and contractor sprayer line, including Magnum series (X3, X5, X7, ProX19), TrueCoat, FinishPro HVLP, Ultra Max II, GMax, and King sprayers. We also stock texture sprayer parts for the Graco ToughTek and RTX series. Sprayersandparts.com ships Graco parts to Phoenix with tracking on every order. Our team is available to help you confirm part compatibility, troubleshoot your sprayer, or advise on the right tip size for your coating and application.

We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 97 Phoenix ZIP codes (85001, 85002, 85003, 85004, 85005, 85006, 85007, 85008, 85009, 85010, 85011, 85012). Anything ordered before 1 PM CST leaves that day.

The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Genuine Graco, never aftermarket
Shared Kits
X5 and X7 pump kit in common
97 ZIPs
Covered in Phoenix alone

Serving Arizona Homes and Workshops

For Phoenix, Arizona painting contractors, equipment reliability directly affects project schedules and profitability. A worn pump packing, a clogged filter, or a damaged spray tip can stop a crew in its tracks. Stocking a few key Graco OEM replacement parts prevents that scenario. Painters in Phoenix, Arizona can rely on Sprayersandparts.com for consistent inventory, genuine Graco quality, and shipping they can track. Order today and have your parts in hand before your next job.

Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.

Arizona painters rely on Sprayers and Parts for authentic Graco sprayers, guns and replacement components. We deliver to 50 cities statewide, from Anthem, Apache Junction, Avondale and beyond.Because we operate online rather than through a trade counter, our inventory runs far deeper than a regional dealer — including legacy and discontinued Graco part numbers going back two decades. Anything ordered by 1 PM CST leaves the warehouse that day and is tracked to your door.

Every Arizona order ships from the same warehouse on the same schedule.

Working outside Phoenix? Browse every Arizona city we ship to to find your area.

Find Us on Google

See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Phoenix.

View Our Google Profile
+1 713-931-4102
Fast shipping to Phoenix 85001

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
“Ordered this for a job and this 24W830 Coupled Hose Kit and the build quality matched what we expect from genuine Graco parts. Part #24W830 matched exactly. Glad we found the exact part number we needed.”
Verified Buyer · Part #24W830
“Ordered the 16T543 Filter Base Manifold for Ultra Max II (16T543) for our crew - it's holding up well after regular use on the job. Customer support was helpful when I had questions about fit.”
Verified Buyer · Part #16T543
MF
“Picked this up to replace a worn part and for the 253367 Power Cord (Part #253367) and installation took less than ten minutes. This is now our go-to for replacement parts.”
Verified Buyer · Part #253367
“Needed this fast for an active job site - for the 17C541 Painted Front Cover (Part #17C541) and it's holding up well after regular use on the job. Exactly what was described - no complaints.”
Verified Buyer · Part #17C541
“Replaced the OEM part with this one and for the 17E748 Brand Label for Texspray Markv Side (Part #17E748) and it solved the issue we were having right away. Easy to order once I had the part number from the diagram.”
Verified Buyer · Part #17E748
TP
“Needed this fast for an active job site - this 195395 End Cap and it solved the issue we were having right away. Part #195395 matched exactly. Will be ordering more parts from here.”
Verified Buyer · Part #195395
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart