Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
Tempe, Arizona

Magnum X5 Replacement Parts in Tempe

Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Tempe with no counter wait. Nearly every common failure is a stocked, inexpensive item.

Fast Shipping
Order by 1 PM CST
100% OEM
Never aftermarket
Shared Kits
X5 and X7 use the same pump kit

Delivering across Tempe

12 ZIP codes served:
85008, 85044, 85202, 85226, 85280, 85281, 85282, 85283, 85284, 85285, 85287, 85289

Pump, suction, gun, electrical — and the machine itself

Find it by symptom

What Your X5 Is Doing, and What Usually Fixes It

Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.

Will Not Prime

Most often a stuck intake ball or split suction tube.

Loses Pressure

Normally worn pump packings.

Spits or Tails

A worn tip gives fingers and tails.

Will Not Start

Control board or enclosure, once power is ruled out.

X5 parts by system

Serving Tempe and the wider Arizona area

Not sure which part?

Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.

+1 713-931-4102 or browse the parts diagrams →

Magnum X5 Parts in Tempe — Common Questions

Straight answers for homeowners repairing their own sprayer in Tempe, Arizona.

Do you ship X5 parts to Tempe?

Yes — we ship to all 12 Tempe ZIP codes, including 85008, and across Arizona. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.

Is it worth repairing an X5, or should I replace it?

In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.

Do X5 and X7 parts interchange?

Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.

My X5 will not prime — what do I change?

Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.

Are these genuine Graco parts?

We stock authentic Graco components only. Copy parts often cost more in the long run than they save.

How do I stop it failing again?

Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.

Magnum X5 Parts for Tempe, Arizona

Tempe, Arizona professionals trust Sprayersandparts.com for factory-genuine Graco parts and equipment. Whether you need a replacement pump, tip, filter, or a complete airless sprayer, we ship to Tempe (85008, 85044, 85202, 85226, and more) quickly and reliably. Professional painters in Arizona choose Sprayersandparts.com because we maintain deep stock of Graco's most commonly replaced parts: RAC X tips, pump repair kits, gun filters, suction tubes, and hose assemblies — so you're never waiting weeks for back-ordered items. Choosing genuine Graco parts means your sprayer performs as Graco intended — consistent pressure, reliable atomization, and a longer service life. Order from Sprayersandparts.com today and receive your parts in Tempe without the hassle of searching multiple suppliers.

We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 12 Tempe ZIP codes (85008, 85044, 85202, 85226, 85280, 85281, 85282, 85283, 85284, 85285, 85287, 85289). Orders placed by 1 PM CST ship the same business day.

The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Genuine Graco, never aftermarket
Shared Kits
X5 and X7 pump kit in common
12 ZIPs
Covered in Tempe alone

Serving Arizona Homes and Workshops

Paint sprayer performance comes down to parts quality. In Tempe, Arizona, professionals who have switched to genuine Graco OEM components report fewer pressure drops, longer pump life, and better tip-to-tip consistency than those who rely on aftermarket alternatives. Painters in Tempe, Arizona can rely on Sprayersandparts.com for consistent inventory, genuine Graco quality, and shipping they can track. Order today and have your parts in hand before your next job.

Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.

Arizona painters rely on Sprayers and Parts for authentic Graco sprayers, guns and replacement components. We deliver to 50 cities statewide, from Anthem, Apache Junction, Avondale and beyond.Because we operate online rather than through a trade counter, our inventory runs far deeper than a regional dealer — including legacy and discontinued Graco part numbers going back two decades. Anything ordered by 1 PM CST leaves the warehouse that day and is tracked to your door.

Every Arizona order ships from the same warehouse on the same schedule.

Working outside Tempe? Browse every Arizona city we ship to to find your area.

Find Us on Google

See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Tempe.

View Our Google Profile
+1 713-931-4102
Fast shipping to Tempe 85008

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
“The 128726 Phillips Pan Head Machine Screw (Part #128726) - it matched the original spec exactly, down to the part number. Will be ordering more parts from here.”
Verified Buyer · Part #128726
KP
“This was a straightforward swap - for the 107079 O-Ring Packing (Part #107079) and the fit and finish were spot on, no surprises. Customer support was helpful when I had questions about fit.”
Verified Buyer · Part #107079
“Wasn't sure about the fit at first, but this 15R406 Label, Prostart Sys, Linedriver and the machine was back up and running the same day. Part #15R406 matched exactly. No issues at all - does exactly what it should.”
Verified Buyer · Part #15R406
“Ordered the 24E400 Pop Pin Lock Out (24E400) for our crew - it fit perfectly with no modifications needed. No issues at all - does exactly what it should.”
Verified Buyer · Part #24E400
“Wasn't sure about the fit at first, but this MTA106 Hopper Flange Seal and it solved the issue we were having right away. Part #MTA106 matched exactly. Would order again without hesitation.”
Verified Buyer · Part #MTA106
“Ordered the 25A495 Charger Board Repair Kit (25A495) for our crew - the build quality matched what we expect from genuine Graco parts. No issues at all - does exactly what it should.”
Verified Buyer · Part #25A495
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart