Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
Dubuque, Iowa

Magnum X5 Replacement Parts in Dubuque

Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Dubuque with no counter wait. Nearly every common failure is a stocked, inexpensive item.

Fast Shipping
Order by 1 PM CST
100% OEM
Never aftermarket
Shared Kits
X5 and X7 use the same pump kit

Delivering across Dubuque

6 ZIP codes served:
52001, 52002, 52003, 52004, 52068, 52099

Pump, suction, gun, electrical — and the machine itself

Find it by symptom

What Your X5 Is Doing, and What Usually Fixes It

Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.

Will Not Prime

Most often a stuck intake ball or split suction tube.

Loses Pressure

Normally worn pump packings.

Spits or Tails

A worn tip gives fingers and tails.

Will Not Start

Control board or enclosure, once power is ruled out.

X5 parts by system

Serving Dubuque and the wider Iowa area

Not sure which part?

Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.

+1 713-931-4102 or browse the parts diagrams →

Magnum X5 Parts in Dubuque — Common Questions

Straight answers for homeowners repairing their own sprayer in Dubuque, Iowa.

Do you ship X5 parts to Dubuque?

Yes — we ship to all 6 Dubuque ZIP codes, including 52001, and across Iowa. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.

Is it worth repairing an X5, or should I replace it?

In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.

Do X5 and X7 parts interchange?

Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.

My X5 will not prime — what do I change?

Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.

Are these genuine Graco parts?

We stock authentic Graco components only. Copy parts often cost more in the long run than they save.

How do I stop it failing again?

Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.

Magnum X5 Parts for Dubuque, Iowa

Contractors and DIY painters in Dubuque, Iowa rely on Sprayersandparts.com for authentic Graco sprayers, spray guns, hoses, and repair kits. We serve the Dubuque area (52001, 52002, 52003, 52004, and more) with fast, traceable shipping every business day. From the smallest o-ring to a complete airless pump assembly, Sprayersandparts.com stocks the parts that keep Graco sprayers running. We also carry full replacement spray guns, pressure-relief valve assemblies, motor brushes, and electronic control boards for Ultra Max and GMax models. Shop the Sprayersandparts.com catalog by sprayer model, series, or part category to find exactly what you need. We ship to Dubuque quickly and include tracking on every order so you always know where your parts are.

We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 6 Dubuque ZIP codes (52001, 52002, 52003, 52004, 52068, 52099). Anything ordered before 1 PM CST leaves that day.

The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Genuine Graco, never aftermarket
Shared Kits
X5 and X7 pump kit in common
6 ZIPs
Covered in Dubuque alone

Serving Iowa Homes and Workshops

Graco has built its reputation on consistent, high-quality airless spray technology. For painters working in Dubuque, Iowa, that reputation matters — on large commercial projects where downtime is costly and on residential jobs where finish quality is everything. Sprayersandparts.com is committed to keeping Dubuque, Iowa painters productive. Genuine Graco parts, fast order processing, and knowledgeable support mean you spend less time sourcing and more time painting.

Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.

We ship genuine Graco equipment to painting professionals throughout Iowa. We deliver to 30 cities statewide, from Altoona, Ames, Ankeny and beyond.Because we operate online rather than through a trade counter, our inventory runs far deeper than a regional dealer — including legacy and discontinued Graco part numbers going back two decades. Anything ordered by 1 PM CST leaves the warehouse that day and is tracked to your door.

Every Iowa order ships from the same warehouse on the same schedule.

Working outside Dubuque? Browse every Iowa city we ship to to find your area.

Find Us on Google

See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Dubuque.

View Our Google Profile
+1 713-931-4102
Fast shipping to Dubuque 52001

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
“Wasn't sure about the fit at first, but for the 158674 O-Ring Packing (Part #158674) and it fit perfectly with no modifications needed. Will be ordering more parts from here.”
Verified Buyer · Part #158674
“Had this on hand as a spare and for the 170709 Poppet Valve (Part #170709) and the build quality matched what we expect from genuine Graco parts. Glad we found the exact part number we needed.”
Verified Buyer · Part #170709
“Our crew has used a few of these now and this 253032 Air Cap Seal Kit (5 pack of seals and o-rings) and the machine was back up and running the same day. Part #253032 matched exactly. No issues at all - does exactly what it should.”
Verified Buyer · Part #253032
“Needed a replacement 15E022 Prime Valve Seat, part number 15E022, and shipping was quick and the part was packaged well. Customer support was helpful when I had questions about fit.”
Verified Buyer · Part #15E022
“Ordered the 16T543 Filter Base Manifold for Ultra Max II (16T543) for our crew - it's holding up well after regular use on the job. Customer support was helpful when I had questions about fit.”
Verified Buyer · Part #16T543
“Had this on hand as a spare and for the 17M395 Insert Lid (Part #17M395) and the machine was back up and running the same day. Would order again without hesitation.”
Verified Buyer · Part #17M395
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart