Magnum X5 Replacement Parts in Bruno
Factory-original Magnum parts, so a tired X5 gets rebuilt rather than binned, dispatched to Bruno without a distributor in the middle. Most X5 faults come down to a handful of parts, and we stock all of them.
Delivering across Bruno
2 ZIP codes served:
67002, 67010
What Your X5 Is Doing, and What Usually Fixes It
The X5 tends to fail in predictable ways. The behaviour points at the part far more reliably than the diagram does. If in doubt, call us before ordering — it costs nothing to check.
Will Not Prime
Check the inlet valve and suction tube first.
Loses Pressure
Packings pass once worn, so pressure drifts.
Spits or Tails
Usually the tip or gun needle.
Will Not Start
Often an extension lead, not the machine.
X5 parts by system
Serving Bruno and the wider Kansas area
- Pump repair kit — shared across X5 and X7
- Intake valve & suction set — priming faults
- Prime/spray drain valve — will not switch or leaks
- TrueAirless tips — pattern and finish problems
- Hose sets & extensions — reach and replacements
- Control board & enclosure — electrical faults
Not sure which part?
Say what it does when you pull the trigger — that is usually quicker than reading part numbers off a diagram.
+1 713-931-4102 or browse the parts diagrams →We also ship to 8 nearby Kansas communities
Hutchinson, Lenexa, Manhattan, Prairie-village, Kansas-city, Emporia, Junction-city, Derby
Magnum X5 Parts in Bruno — Common Questions
Straight answers for homeowners repairing their own sprayer in Bruno, Kansas.
Do you ship X5 parts to Bruno?
Yes — we ship to all 2 Bruno ZIP codes, including 67002, and across Kansas. Same-day dispatch applies to orders in before 1 PM CST. Small parts go out by post, so they arrive quickly.
Is it worth repairing an X5, or should I replace it?
Nearly always worth fixing. A pump repair kit costs a small fraction of a new machine. Consider replacing if the motor is dead or the frame is damaged.
Do X5 and X7 parts interchange?
A good number are shared, including the pump kit. Guns, hoses and tips are common across the Magnum range. Body and enclosure parts differ between models. Ask us and we will check it.
My X5 will not prime — what do I change?
Start with the intake valve and the suction set. A ball stuck with old material stops it drawing entirely. If the intake is sound, move on to the pump kit.
Are these genuine Graco parts?
Every part we sell is factory-genuine Graco. Imitation seals fail early and damage the pump.
How do I stop it failing again?
The end-of-job clean is the whole maintenance routine. Store it with pump protector fluid rather than water. Most failures we supply parts for started as poor cleaning.
Magnum X5 Parts for Bruno, Kansas
Sprayersandparts.com is your online source for Graco airless sprayers, spray guns, hoses, and genuine OEM repair parts in Bruno, Kansas. We process orders daily and ship throughout the Bruno area (67002, 67010). Our catalog extends beyond parts: we carry complete Graco airless sprayer packages, HVLP turbine and spray gun systems, texture sprayer setups, and line striping equipment — everything a painting contractor in Kansas needs to stay productive. Sprayersandparts.com stands behind every order with responsive customer support. If you're unsure which part fits your model, contact us with your sprayer's serial number and we'll confirm compatibility before you buy.
We keep the first-to-fail items on the shelf — packings, filters, spray tips and pressure controls — and ship to all 2 Bruno ZIP codes (67002, 67010). Anything ordered before 1 PM CST leaves that day.
Worth knowing: the machine in your garage is probably fixable — the parts cost far less than people assume.
Serving Kansas Homes and Workshops
Paint sprayer performance comes down to parts quality. In Bruno, Kansas, professionals who have switched to genuine Graco OEM components report fewer pressure drops, longer pump life, and better tip-to-tip consistency than those who rely on aftermarket alternatives. For Bruno, Kansas painting professionals, Sprayersandparts.com is the straightforward solution: genuine Graco parts, a full sprayer catalog, fast shipping, and support when you need help identifying what your sprayer needs.
Send your sprayer model and we will verify fitment before you buy. We stock centrally rather than locally, which is why our inventory runs deeper than a regional dealer.
Sprayers and Parts supplies painting contractors across Kansas with factory-genuine Graco equipment. Orders go out daily to 28 Kansas locations, including Bruno, Derby, Dodge City.Running online instead of a storefront lets us hold stock most local suppliers cannot justify, right down to obsolete components for older machines still earning their keep. Orders placed before 1 PM CST ship the same business day, with tracking on every parcel.
Coverage is identical across Kansas — same inventory, same cut-off.
Working outside Bruno? Browse every Kansas city we ship to to find your area.
Find Us on Google
View verified reviews and how to reach us on our Google Business Profile — then order online for delivery to Bruno.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.