Magnum X5 Replacement Parts in Newton
Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Newton with no counter wait. Nearly every common failure is a stocked, inexpensive item.
Delivering across Newton
2 ZIP codes served:
67056, 67114
What Your X5 Is Doing, and What Usually Fixes It
Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.
Will Not Prime
Most often a stuck intake ball or split suction tube.
Loses Pressure
Normally worn pump packings.
Spits or Tails
A worn tip gives fingers and tails.
Will Not Start
Control board or enclosure, once power is ruled out.
X5 parts by system
Serving Newton and the wider Kansas area
- Pump repair kit — shared across X5 and X7
- Intake valve & suction set — priming faults
- Prime/spray drain valve — will not switch or leaks
- TrueAirless tips — pattern and finish problems
- Hose sets & extensions — reach and replacements
- Control board & enclosure — electrical faults
Not sure which part?
Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.
+1 713-931-4102 or browse the parts diagrams →Magnum X5 Parts in Newton — Common Questions
Straight answers for homeowners repairing their own sprayer in Newton, Kansas.
Do you ship X5 parts to Newton?
Yes — we ship to all 2 Newton ZIP codes, including 67056, and across Kansas. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.
Is it worth repairing an X5, or should I replace it?
In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.
Do X5 and X7 parts interchange?
Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.
My X5 will not prime — what do I change?
Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.
Are these genuine Graco parts?
We stock authentic Graco components only. Copy parts often cost more in the long run than they save.
How do I stop it failing again?
Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.
Magnum X5 Parts for Newton, Kansas
Sprayersandparts.com supplies Newton, Kansas with authentic Graco airless sprayers and OEM parts. From simple filters and tips to complete pump rebuild kits, every item ships directly to Newton (67056, 67114) — no waiting on a local distributor. Our inventory covers Graco's entire residential and contractor sprayer line, including Magnum series (X3, X5, X7, ProX19), TrueCoat, FinishPro HVLP, Ultra Max II, GMax, and King sprayers. We also stock texture sprayer parts for the Graco ToughTek and RTX series. Sprayersandparts.com ships Graco parts to Newton with tracking on every order. Our team is available to help you confirm part compatibility, troubleshoot your sprayer, or advise on the right tip size for your coating and application.
We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 2 Newton ZIP codes (67056, 67114). Same-day dispatch on orders in before 1 PM CST.
The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.
Serving Kansas Homes and Workshops
For Newton, Kansas painting contractors, equipment reliability directly affects project schedules and profitability. A worn pump packing, a clogged filter, or a damaged spray tip can stop a crew in its tracks. Stocking a few key Graco OEM replacement parts prevents that scenario. Painters in Newton, Kansas can rely on Sprayersandparts.com for consistent inventory, genuine Graco quality, and shipping they can track. Order today and have your parts in hand before your next job.
Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.
Sprayers and Parts supplies painting contractors across Kansas with factory-genuine Graco equipment. Orders go out daily to 28 Kansas locations, including Bruno, Derby, Dodge City.Running online instead of a storefront lets us hold stock most local suppliers cannot justify, right down to obsolete components for older machines still earning their keep. Orders placed before 1 PM CST ship the same business day, with tracking on every parcel.
Every Kansas order ships from the same warehouse on the same schedule.
Working outside Newton? Browse every Kansas city we ship to to find your area.
Find Us on Google
See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Newton.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.