Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
Brunswick, Maine

Magnum X5 Replacement Parts in Brunswick

Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Brunswick with no counter wait. Nearly every common failure is a stocked, inexpensive item.

Fast Shipping
Order by 1 PM CST
100% OEM
Never aftermarket
Shared Kits
X5 and X7 use the same pump kit

Pump, suction, gun, electrical — and the machine itself

Find it by symptom

What Your X5 Is Doing, and What Usually Fixes It

Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.

Will Not Prime

Most often a stuck intake ball or split suction tube.

Loses Pressure

Normally worn pump packings.

Spits or Tails

A worn tip gives fingers and tails.

Will Not Start

Control board or enclosure, once power is ruled out.

X5 parts by system

Serving Brunswick and the wider Maine area

Not sure which part?

Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.

+1 713-931-4102 or browse the parts diagrams →

Magnum X5 Parts in Brunswick — Common Questions

Straight answers for homeowners repairing their own sprayer in Brunswick, Maine.

Do you ship X5 parts to Brunswick?

Yes — we ship to all 1 Brunswick ZIP codes, including 04011, and across Maine. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.

Is it worth repairing an X5, or should I replace it?

In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.

Do X5 and X7 parts interchange?

Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.

My X5 will not prime — what do I change?

Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.

Are these genuine Graco parts?

We stock authentic Graco components only. Copy parts often cost more in the long run than they save.

How do I stop it failing again?

Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.

Magnum X5 Parts for Brunswick, Maine

In Brunswick, Maine, painters and contractors can order any genuine Graco part or sprayer through Sprayersandparts.com and receive it quickly. We ship to Brunswick (04011) and process every order with care. We stock the complete Graco parts ecosystem: airless spray tips (RAC X, RAC IV, RAC V, SwitchTip), tip guards, gun filters, suction sets, fluid outlet valves, drive housings, motor assemblies, pressure control knobs, hose swivels, and full piston pump repair kits. All items are factory-genuine Graco. With thousands of Graco parts in stock and same-business-day shipping to Brunswick, Sprayersandparts.com minimizes your downtime and keeps your projects on schedule. Browse our catalog or search by part number to order today.

We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 1 Brunswick ZIP codes (04011). Anything ordered before 1 PM CST leaves that day.

The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Genuine Graco, never aftermarket
Shared Kits
X5 and X7 pump kit in common
1 ZIPs
Covered in Brunswick alone

Serving Maine Homes and Workshops

Graco's service life depends heavily on correct maintenance and genuine parts. For Brunswick, Maine painters who rely on their sprayers daily, keeping a stock of key OEM components — tips, filters, and a piston pump repair kit — is standard professional practice. For Brunswick, Maine painting professionals, Sprayersandparts.com is the straightforward solution: genuine Graco parts, a full sprayer catalog, fast shipping, and support when you need help identifying what your sprayer needs.

Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.

From small residential jobs to full commercial repaints, Maine contractors source Graco parts through Sprayers and Parts. We deliver to 15 cities statewide, from Auburn, Augusta, Bangor and beyond.Because we operate online rather than through a trade counter, our inventory runs far deeper than a regional dealer — including legacy and discontinued Graco part numbers going back two decades. Anything ordered by 1 PM CST leaves the warehouse that day and is tracked to your door.

Every Maine order ships from the same warehouse on the same schedule.

Working outside Brunswick? Browse every Maine city we ship to to find your area.

Find Us on Google

See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Brunswick.

View Our Google Profile
+1 713-931-4102
Fast shipping to Brunswick 04011

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
“Our crew has used a few of these now and this 243190 Intake Seat Repair Kit and the build quality matched what we expect from genuine Graco parts. Part #243190 matched exactly. Would order again without hesitation.”
Verified Buyer · Part #243190
“Needed a replacement 17V782 Pressure Control Kit, part number 17V782, and the fit and finish were spot on, no surprises. Will be ordering more parts from here.”
Verified Buyer · Part #17V782
PR
“This was a straightforward swap - this 17J160 Power Cord and it fit perfectly with no modifications needed. Part #17J160 matched exactly. Customer support was helpful when I had questions about fit.”
Verified Buyer · Part #17J160
“Picked this up to replace a worn part and for the 25N208 Carbide Flail 8 pt. 10 in. Medium Cut Drum for Pro / HP Series (Part #25N208) and the machine was back up and running the same day. Would order again without hesitation.”
Verified Buyer · Part #25N208
“Had this on hand as a spare and this 288438 FTX LP Gun Packaged and it's holding up well after regular use on the job. Part #288438 matched exactly. Saved us a trip to the dealer.”
Verified Buyer · Part #288438
“The 16C457 Pail Hanger (Part #16C457) - installation took less than ten minutes. Good value for a genuine Graco part.”
Verified Buyer · Part #16C457
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart