Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
Brooklyn-center, Minnesota

Magnum X5 Replacement Parts in Brooklyn-center

Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Brooklyn-center with no counter wait. Nearly every common failure is a stocked, inexpensive item.

Fast Shipping
Order by 1 PM CST
100% OEM
Never aftermarket
Shared Kits
X5 and X7 use the same pump kit

Delivering across Brooklyn-center

2 ZIP codes served:
55429, 55430

Pump, suction, gun, electrical — and the machine itself

Find it by symptom

What Your X5 Is Doing, and What Usually Fixes It

Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.

Will Not Prime

Most often a stuck intake ball or split suction tube.

Loses Pressure

Normally worn pump packings.

Spits or Tails

A worn tip gives fingers and tails.

Will Not Start

Control board or enclosure, once power is ruled out.

X5 parts by system

Serving Brooklyn-center and the wider Minnesota area

Not sure which part?

Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.

+1 713-931-4102 or browse the parts diagrams →

Magnum X5 Parts in Brooklyn-center — Common Questions

Straight answers for homeowners repairing their own sprayer in Brooklyn-center, Minnesota.

Do you ship X5 parts to Brooklyn-center?

Yes — we ship to all 2 Brooklyn-center ZIP codes, including 55429, and across Minnesota. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.

Is it worth repairing an X5, or should I replace it?

In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.

Do X5 and X7 parts interchange?

Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.

My X5 will not prime — what do I change?

Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.

Are these genuine Graco parts?

We stock authentic Graco components only. Copy parts often cost more in the long run than they save.

How do I stop it failing again?

Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.

Magnum X5 Parts for Brooklyn-center, Minnesota

Sprayersandparts.com is your online source for Graco airless sprayers, spray guns, hoses, and genuine OEM repair parts in Brooklyn-center, Minnesota. We process orders daily and ship throughout the Brooklyn-center area (55429, 55430). Our catalog extends beyond parts: we carry complete Graco airless sprayer packages, HVLP turbine and spray gun systems, texture sprayer setups, and line striping equipment — everything a painting contractor in Minnesota needs to stay productive. Sprayersandparts.com stands behind every order with responsive customer support. If you're unsure which part fits your model, contact us with your sprayer's serial number and we'll confirm compatibility before you buy.

We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 2 Brooklyn-center ZIP codes (55429, 55430). Orders placed by 1 PM CST ship the same business day.

The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Genuine Graco, never aftermarket
Shared Kits
X5 and X7 pump kit in common
2 ZIPs
Covered in Brooklyn-center alone

Serving Minnesota Homes and Workshops

Paint sprayer performance comes down to parts quality. In Brooklyn-center, Minnesota, professionals who have switched to genuine Graco OEM components report fewer pressure drops, longer pump life, and better tip-to-tip consistency than those who rely on aftermarket alternatives. For Brooklyn-center, Minnesota painting professionals, Sprayersandparts.com is the straightforward solution: genuine Graco parts, a full sprayer catalog, fast shipping, and support when you need help identifying what your sprayer needs.

Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.

Minnesota painters rely on Sprayers and Parts for authentic Graco sprayers, guns and replacement components. We deliver to 71 cities statewide, from Albert Lea, Andover, Anoka and beyond.Because we operate online rather than through a trade counter, our inventory runs far deeper than a regional dealer — including legacy and discontinued Graco part numbers going back two decades. Anything ordered by 1 PM CST leaves the warehouse that day and is tracked to your door.

Every Minnesota order ships from the same warehouse on the same schedule.

Working outside Brooklyn-center? Browse every Minnesota city we ship to to find your area.

Find Us on Google

See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Brooklyn-center.

View Our Google Profile
+1 713-931-4102
Fast shipping to Brooklyn-center 55429

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
“Wasn't sure about the fit at first, but for the 160624 Buna-N Square O-Ring Packing (Part #160624) and installation took less than ten minutes. Will be ordering more parts from here.”
Verified Buyer · Part #160624
“Needed a replacement 112181 Packing U-Cup, part number 112181, and the machine was back up and running the same day. Will be ordering more parts from here.”
Verified Buyer · Part #112181
“Needed a replacement 16A519 Agitator Shaft, part number 16A519, and the build quality matched what we expect from genuine Graco parts. No issues at all - does exactly what it should.”
Verified Buyer · Part #16A519
“Wasn't sure about the fit at first, but for the 19Y107 Kit, Repair, Valve, Directional (Part #19Y107) and installation took less than ten minutes. Good value for a genuine Graco part.”
Verified Buyer · Part #19Y107
“Needed a replacement 287720 Connecting Rod Repair Kit, part number 287720, and it's been reliable through several jobs since. No issues at all - does exactly what it should.”
Verified Buyer · Part #287720
“The 222588 Fluid Section Pump Packing Kit (Part #222588) - it solved the issue we were having right away. Saved us a trip to the dealer.”
Verified Buyer · Part #222588
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart