Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
Blaine, Minnesota

Magnum X5 Replacement Parts in Blaine

Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Blaine with no counter wait. Nearly every common failure is a stocked, inexpensive item.

Fast Shipping
Order by 1 PM CST
100% OEM
Never aftermarket
Shared Kits
X5 and X7 use the same pump kit

Delivering across Blaine

3 ZIP codes served:
55014, 55434, 55449

Pump, suction, gun, electrical — and the machine itself

Find it by symptom

What Your X5 Is Doing, and What Usually Fixes It

Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.

Will Not Prime

Most often a stuck intake ball or split suction tube.

Loses Pressure

Normally worn pump packings.

Spits or Tails

A worn tip gives fingers and tails.

Will Not Start

Control board or enclosure, once power is ruled out.

X5 parts by system

Serving Blaine and the wider Minnesota area

Not sure which part?

Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.

+1 713-931-4102 or browse the parts diagrams →

Magnum X5 Parts in Blaine — Common Questions

Straight answers for homeowners repairing their own sprayer in Blaine, Minnesota.

Do you ship X5 parts to Blaine?

Yes — we ship to all 3 Blaine ZIP codes, including 55014, and across Minnesota. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.

Is it worth repairing an X5, or should I replace it?

In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.

Do X5 and X7 parts interchange?

Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.

My X5 will not prime — what do I change?

Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.

Are these genuine Graco parts?

We stock authentic Graco components only. Copy parts often cost more in the long run than they save.

How do I stop it failing again?

Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.

Magnum X5 Parts for Blaine, Minnesota

Painting professionals in Blaine, Minnesota know that downtime costs money. Sprayersandparts.com keeps your crew moving by delivering genuine Graco airless sprayer parts to the Blaine area (55014, 55434, 55449) with same-business-day processing. We supply everything from Graco Magnum replacement tips and filters to complete Ultra Max II 1095 piston pump assemblies. Our stock also includes Graco spray hoses in 1/4" and 3/8" diameters, ranging from 25 ft to 100 ft, plus all standard Graco gun and hose fittings. Your Graco sprayer investment is protected when you use OEM parts from Sprayersandparts.com. We ship to Blaine daily, offer straightforward returns, and provide part-matching assistance so you order with confidence.

We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 3 Blaine ZIP codes (55014, 55434, 55449). Same-day dispatch on orders in before 1 PM CST.

The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Genuine Graco, never aftermarket
Shared Kits
X5 and X7 pump kit in common
3 ZIPs
Covered in Blaine alone

Serving Minnesota Homes and Workshops

Airless painting in Blaine, Minnesota demands reliable equipment. Graco's lineup — from the compact Magnum X5 to the high-volume Ultra Max II 1095 — covers every application scale, and keeping these sprayers running requires genuine OEM parts, not substitutes that can wear prematurely or fail mid-job. Sprayersandparts.com is committed to keeping Blaine, Minnesota painters productive. Genuine Graco parts, fast order processing, and knowledgeable support mean you spend less time sourcing and more time painting.

Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.

Minnesota painters rely on Sprayers and Parts for authentic Graco sprayers, guns and replacement components. We deliver to 71 cities statewide, from Albert Lea, Andover, Anoka and beyond.Because we operate online rather than through a trade counter, our inventory runs far deeper than a regional dealer — including legacy and discontinued Graco part numbers going back two decades. Anything ordered by 1 PM CST leaves the warehouse that day and is tracked to your door.

Every Minnesota order ships from the same warehouse on the same schedule.

Working outside Blaine? Browse every Minnesota city we ship to to find your area.

Find Us on Google

See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Blaine.

View Our Google Profile
+1 713-931-4102
Fast shipping to Blaine 55014

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
“The 16X904 3/8-Inch ID Coupled Hose (Part #16X904) - it fit perfectly with no modifications needed. Customer support was helpful when I had questions about fit.”
Verified Buyer · Part #16X904
“Grabbed one of these on a recommendation, and for the 868015 Pressure Gauge 0-5000 PSI (Part #868015) and it fit perfectly with no modifications needed. Easy to order once I had the part number from the diagram.”
Verified Buyer · Part #868015
KF
“Needed a replacement 179733 Sleeve Seal, part number 179733, and it's holding up well after regular use on the job. Exactly what was described - no complaints.”
Verified Buyer · Part #179733
“Ordered the 117459 O-Ring Packing Seal (117459) for our crew - it fit perfectly with no modifications needed. Glad we found the exact part number we needed.”
Verified Buyer · Part #117459
“Ordered the 117672 GT2 3mm Belt (117672) for our crew - installation took less than ten minutes. Exactly what was described - no complaints.”
Verified Buyer · Part #117672
“Ordered the 241804 Tip Filter Repair Kit (241804) for our crew - it solved the issue we were having right away. Would order again without hesitation.”
Verified Buyer · Part #241804
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart