Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
O-fallon, Missouri

Magnum X5 Replacement Parts in O-fallon

Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to O-fallon with no counter wait. Nearly every common failure is a stocked, inexpensive item.

Fast Shipping
Order by 1 PM CST
100% OEM
Never aftermarket
Shared Kits
X5 and X7 use the same pump kit

Pump, suction, gun, electrical — and the machine itself

Find it by symptom

What Your X5 Is Doing, and What Usually Fixes It

Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.

Will Not Prime

Most often a stuck intake ball or split suction tube.

Loses Pressure

Normally worn pump packings.

Spits or Tails

A worn tip gives fingers and tails.

Will Not Start

Control board or enclosure, once power is ruled out.

X5 parts by system

Serving O-fallon and the wider Missouri area

Not sure which part?

Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.

+1 713-931-4102 or browse the parts diagrams →

Magnum X5 Parts in O-fallon — Common Questions

Straight answers for homeowners repairing their own sprayer in O-fallon, Missouri.

Do you ship X5 parts to O-fallon?

Yes — we ship to all 2 O-fallon ZIP codes, including 63366, and across Missouri. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.

Is it worth repairing an X5, or should I replace it?

In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.

Do X5 and X7 parts interchange?

Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.

My X5 will not prime — what do I change?

Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.

Are these genuine Graco parts?

We stock authentic Graco components only. Copy parts often cost more in the long run than they save.

How do I stop it failing again?

Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.

Magnum X5 Parts for O-fallon, Missouri

Sprayersandparts.com supplies O-fallon, Missouri with authentic Graco airless sprayers and OEM parts. From simple filters and tips to complete pump rebuild kits, every item ships directly to O-fallon (63366, 63368) — no waiting on a local distributor. Our inventory covers Graco's entire residential and contractor sprayer line, including Magnum series (X3, X5, X7, ProX19), TrueCoat, FinishPro HVLP, Ultra Max II, GMax, and King sprayers. We also stock texture sprayer parts for the Graco ToughTek and RTX series. Sprayersandparts.com ships Graco parts to O-fallon with tracking on every order. Our team is available to help you confirm part compatibility, troubleshoot your sprayer, or advise on the right tip size for your coating and application.

We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 2 O-fallon ZIP codes (63366, 63368). Orders placed by 1 PM CST ship the same business day.

The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Genuine Graco, never aftermarket
Shared Kits
X5 and X7 pump kit in common
2 ZIPs
Covered in O-fallon alone

Serving Missouri Homes and Workshops

Graco airless sprayers are the professional standard for a reason: consistent pressure, fine atomization, and the ability to handle everything from thin stains to heavy latex coatings. In O-fallon, Missouri, contractors and property owners who paint frequently know that keeping their sprayer in top shape is what separates a smooth job from a frustrating one. For O-fallon, Missouri painting professionals, Sprayersandparts.com is the straightforward solution: genuine Graco parts, a full sprayer catalog, fast shipping, and support when you need help identifying what your sprayer needs.

Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.

We ship genuine Graco equipment to painting professionals throughout Missouri. Our Missouri coverage spans 59 cities and towns — among them Affton, Arnold, Ballwin.We are a direct shipper rather than a walk-in store, which is exactly why we can carry the slow-moving and superseded parts that keep older sprayers running. Same-day dispatch applies to orders in before 1 PM CST, tracked the whole way.

Every Missouri order ships from the same warehouse on the same schedule.

Working outside O-fallon? Browse every Missouri city we ship to to find your area.

Find Us on Google

See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to O-fallon.

View Our Google Profile
+1 713-931-4102
Fast shipping to O-fallon 63366

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
“Ordered the 119695 Engine Mount Dampener replaces Graco 195515 (119695 ) for our crew - the machine was back up and running the same day. Good value for a genuine Graco part.”
Verified Buyer · Part #119695
KB
“Ordered this for a job and for the 15G857 Leg Cap (Part #15G857) and it solved the issue we were having right away. Would order again without hesitation.”
Verified Buyer · Part #15G857
“Needed a replacement 128758 Fitting, 1.50 Cmlk F X 1.50 Npt M, part number 128758, and the machine was back up and running the same day. Saved us a trip to the dealer.”
Verified Buyer · Part #128758
“The 288488 Gun Repair Kit (Part #288488) - the machine was back up and running the same day. Saved us a trip to the dealer.”
Verified Buyer · Part #288488
“Needed a replacement 197304 Housing Inlet 3.0 Inch, part number 197304, and installation took less than ten minutes. Would order again without hesitation.”
Verified Buyer · Part #197304
“Had this on hand as a spare and for the 17M395 Insert Lid (Part #17M395) and the machine was back up and running the same day. Would order again without hesitation.”
Verified Buyer · Part #17M395
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart