Magnum X5 Replacement Parts in Klamath-falls
Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Klamath-falls with no counter wait. Nearly every common failure is a stocked, inexpensive item.
Delivering across Klamath-falls
3 ZIP codes served:
97601, 97602, 97603
What Your X5 Is Doing, and What Usually Fixes It
Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.
Will Not Prime
Most often a stuck intake ball or split suction tube.
Loses Pressure
Normally worn pump packings.
Spits or Tails
A worn tip gives fingers and tails.
Will Not Start
Control board or enclosure, once power is ruled out.
X5 parts by system
Serving Klamath-falls and the wider Oregon area
- Pump repair kit — shared across X5 and X7
- Intake valve & suction set — priming faults
- Prime/spray drain valve — will not switch or leaks
- TrueAirless tips — pattern and finish problems
- Hose sets & extensions — reach and replacements
- Control board & enclosure — electrical faults
Not sure which part?
Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.
+1 713-931-4102 or browse the parts diagrams →We also ship to 8 nearby Oregon communities
Aloha, Bethany, Mcminnville, Keizer, Lebanon, Cedar-mill, Lake-oswego, Hillsboro
Magnum X5 Parts in Klamath-falls — Common Questions
Straight answers for homeowners repairing their own sprayer in Klamath-falls, Oregon.
Do you ship X5 parts to Klamath-falls?
Yes — we ship to all 3 Klamath-falls ZIP codes, including 97601, and across Oregon. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.
Is it worth repairing an X5, or should I replace it?
In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.
Do X5 and X7 parts interchange?
Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.
My X5 will not prime — what do I change?
Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.
Are these genuine Graco parts?
We stock authentic Graco components only. Copy parts often cost more in the long run than they save.
How do I stop it failing again?
Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.
Magnum X5 Parts for Klamath-falls, Oregon
Serving Klamath-falls, Oregon (97601, 97602, 97603) and neighboring communities, Sprayersandparts.com offers the complete lineup of Graco airless paint sprayers, HVLP guns, texture sprayers, and OEM replacement parts at competitive prices. Our catalog includes Graco Magnum X5, X7, ProX19, ProX17, FinishPro HVLP sprayers, Ultra Max II 695, 795 and 1095, and Mark V and Mark X contractor sprayers, plus the full range of Graco repair kits, pump packings, filters, spray tips, tip guards, hoses, and gun parts. Every part we sell is OEM — no aftermarket substitutes. Fast shipping, OEM quality, and straightforward customer service — that's what Klamath-falls customers get when they shop at Sprayersandparts.com. Search by model or part number to find exactly what your Graco sprayer needs.
We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 3 Klamath-falls ZIP codes (97601, 97602, 97603). Anything ordered before 1 PM CST leaves that day.
The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.
Serving Oregon Homes and Workshops
Graco has built its reputation on consistent, high-quality airless spray technology. For painters working in Klamath-falls, Oregon, that reputation matters — on large commercial projects where downtime is costly and on residential jobs where finish quality is everything. Sprayersandparts.com is committed to keeping Klamath-falls, Oregon painters productive. Genuine Graco parts, fast order processing, and knowledgeable support mean you spend less time sourcing and more time painting.
Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.
Across Oregon, painting crews and property maintenance teams order their Graco parts from Sprayers and Parts. Our Oregon coverage spans 46 cities and towns — among them Albany, Aloha, Altamont.We are a direct shipper rather than a walk-in store, which is exactly why we can carry the slow-moving and superseded parts that keep older sprayers running. Same-day dispatch applies to orders in before 1 PM CST, tracked the whole way.
Every Oregon order ships from the same warehouse on the same schedule.
Working outside Klamath-falls? Browse every Oregon city we ship to to find your area.
Find Us on Google
See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Klamath-falls.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.
Aftermarket gaskets kept blowing out on hot epoxy. The factory 17V093 lasted the entire tank and still looked new.
”