Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
East-ridge, Tennessee

Magnum X5 Replacement Parts in East-ridge

Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to East-ridge with no counter wait. Nearly every common failure is a stocked, inexpensive item.

Fast Shipping
Order by 1 PM CST
100% OEM
Never aftermarket
Shared Kits
X5 and X7 use the same pump kit

Pump, suction, gun, electrical — and the machine itself

Find it by symptom

What Your X5 Is Doing, and What Usually Fixes It

Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.

Will Not Prime

Most often a stuck intake ball or split suction tube.

Loses Pressure

Normally worn pump packings.

Spits or Tails

A worn tip gives fingers and tails.

Will Not Start

Control board or enclosure, once power is ruled out.

X5 parts by system

Serving East-ridge and the wider Tennessee area

Not sure which part?

Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.

+1 713-931-4102 or browse the parts diagrams →

Magnum X5 Parts in East-ridge — Common Questions

Straight answers for homeowners repairing their own sprayer in East-ridge, Tennessee.

Do you ship X5 parts to East-ridge?

Yes — we ship to all 2 East-ridge ZIP codes, including 37411, and across Tennessee. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.

Is it worth repairing an X5, or should I replace it?

In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.

Do X5 and X7 parts interchange?

Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.

My X5 will not prime — what do I change?

Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.

Are these genuine Graco parts?

We stock authentic Graco components only. Copy parts often cost more in the long run than they save.

How do I stop it failing again?

Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.

Magnum X5 Parts for East-ridge, Tennessee

Painting professionals in East-ridge, Tennessee know that downtime costs money. Sprayersandparts.com keeps your crew moving by delivering genuine Graco airless sprayer parts to the East-ridge area (37411, 37412) with same-business-day processing. We supply everything from Graco Magnum replacement tips and filters to complete Ultra Max II 1095 piston pump assemblies. Our stock also includes Graco spray hoses in 1/4" and 3/8" diameters, ranging from 25 ft to 100 ft, plus all standard Graco gun and hose fittings. Your Graco sprayer investment is protected when you use OEM parts from Sprayersandparts.com. We ship to East-ridge daily, offer straightforward returns, and provide part-matching assistance so you order with confidence.

We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 2 East-ridge ZIP codes (37411, 37412). Order by 1 PM CST and it ships same day, tracked.

The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Genuine Graco, never aftermarket
Shared Kits
X5 and X7 pump kit in common
2 ZIPs
Covered in East-ridge alone

Serving Tennessee Homes and Workshops

Airless painting in East-ridge, Tennessee demands reliable equipment. Graco's lineup — from the compact Magnum X5 to the high-volume Ultra Max II 1095 — covers every application scale, and keeping these sprayers running requires genuine OEM parts, not substitutes that can wear prematurely or fail mid-job. For East-ridge, Tennessee painting professionals, Sprayersandparts.com is the straightforward solution: genuine Graco parts, a full sprayer catalog, fast shipping, and support when you need help identifying what your sprayer needs.

Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.

Across Tennessee, painting crews and property maintenance teams order their Graco parts from Sprayers and Parts. We currently serve 39 communities across the state, including Bartlett, Brentwood, Bristol.Stocking direct means we hold depth on the wear items that fail first — packings, filters, tips and pressure controls — instead of ordering them in. Order before 1 PM CST for same-day dispatch and full tracking across Tennessee.

Every Tennessee order ships from the same warehouse on the same schedule.

Working outside East-ridge? Browse every Tennessee city we ship to to find your area.

Find Us on Google

See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to East-ridge.

View Our Google Profile
+1 713-931-4102
Fast shipping to East-ridge 37411

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
“Ordered the 15V573 Crushproof Inlet Strainer – 1 inch Threaded (15V573) for our crew - it solved the issue we were having right away. Customer support was helpful when I had questions about fit.”
Verified Buyer · Part #15V573
“Ordered the 18D981 Packing, O-Ring, 1.5Mm X 10Mm Id (18D981) for our crew - it's been reliable through several jobs since. Good value for a genuine Graco part.”
Verified Buyer · Part #18D981
“Ordered the 192710 V-Packing (192710) for our crew - it matched the original spec exactly, down to the part number. Exactly what was described - no complaints.”
Verified Buyer · Part #192710
“Picked this up to replace a worn part and this 187625 Drain Valve Handle and it's been reliable through several jobs since. Part #187625 matched exactly. Would order again without hesitation.”
Verified Buyer · Part #187625
“Wasn't sure about the fit at first, but this 19Y269 Cylinder Sleeve for 650-Series Pump Repair and shipping was quick and the part was packaged well. Part #19Y269 matched exactly. This is now our go-to for replacement parts.”
Verified Buyer · Part #19Y269
“Ordered this for a job and for the 17N515 Complete Lid with White Gasket (Part #17N515) and it fit perfectly with no modifications needed. This is now our go-to for replacement parts.”
Verified Buyer · Part #17N515
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart