Magnum X5 Replacement Parts in Dallas
Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Dallas with no counter wait. Nearly every common failure is a stocked, inexpensive item.
Delivering across Dallas
146 ZIP codes served:
75006, 75007, 75019, 75032, 75037, 75041, 75043, 75051, 75052, 75062, 75063, 75080
What Your X5 Is Doing, and What Usually Fixes It
Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.
Will Not Prime
Most often a stuck intake ball or split suction tube.
Loses Pressure
Normally worn pump packings.
Spits or Tails
A worn tip gives fingers and tails.
Will Not Start
Control board or enclosure, once power is ruled out.
X5 parts by system
Serving Dallas and the wider Texas area
- Pump repair kit — shared across X5 and X7
- Intake valve & suction set — priming faults
- Prime/spray drain valve — will not switch or leaks
- TrueAirless tips — pattern and finish problems
- Hose sets & extensions — reach and replacements
- Control board & enclosure — electrical faults
Not sure which part?
Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.
+1 713-931-4102 or browse the parts diagrams →We also ship to 8 nearby Texas communities
San-angelo, Fort-worth, Burleson, Pecan-grove, Mercedes, Stafford, Colleyville, Greenville
Magnum X5 Parts in Dallas — Common Questions
Straight answers for homeowners repairing their own sprayer in Dallas, Texas.
Do you ship X5 parts to Dallas?
Yes — we ship to all 146 Dallas ZIP codes, including 75006, and across Texas. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.
Is it worth repairing an X5, or should I replace it?
In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.
Do X5 and X7 parts interchange?
Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.
My X5 will not prime — what do I change?
Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.
Are these genuine Graco parts?
We stock authentic Graco components only. Copy parts often cost more in the long run than they save.
How do I stop it failing again?
Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.
Magnum X5 Parts for Dallas, Texas
Whether you're spray-painting walls, ceilings, or exterior surfaces, Sprayersandparts.com provides Dallas, Texas customers with authentic Graco equipment and parts. Orders to Dallas (75006, 75007, 75019, 75032, and more) ship same or next business day. From Graco Magnum X5 homeowner sprayers to Ultra Max II 1095 Hi-Boy contractor units, Sprayersandparts.com covers the full product range. Parts for every model — pump kits, drive housing assemblies, pressure relief valves, tip filters, and gun components — are in stock and ready to ship. We back every order with easy returns and parts-matching support. Shopping with Sprayersandparts.com means access to genuine Graco quality, fast shipping to Dallas, and real help when you need it.
We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 146 Dallas ZIP codes (75006, 75007, 75019, 75032, 75037, 75041, 75043, 75051, 75052, 75062, 75063, 75080). Order by 1 PM CST and it ships same day, tracked.
The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.
Serving Texas Homes and Workshops
For Dallas, Texas painting contractors, equipment reliability directly affects project schedules and profitability. A worn pump packing, a clogged filter, or a damaged spray tip can stop a crew in its tracks. Stocking a few key Graco OEM replacement parts prevents that scenario. For Dallas, Texas painting professionals, Sprayersandparts.com is the straightforward solution: genuine Graco parts, a full sprayer catalog, fast shipping, and support when you need help identifying what your sprayer needs.
Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.
Texas painters rely on Sprayers and Parts for authentic Graco sprayers, guns and replacement components. We deliver to 190 cities statewide, from Abilene, Addison, Alamo and beyond.Because we operate online rather than through a trade counter, our inventory runs far deeper than a regional dealer — including legacy and discontinued Graco part numbers going back two decades. Anything ordered by 1 PM CST leaves the warehouse that day and is tracked to your door.
Every Texas order ships from the same warehouse on the same schedule.
Working outside Dallas? Browse every Texas city we ship to to find your area.
Find Us on Google
See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Dallas.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.