Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
Mansfield, Texas

Magnum X5 Replacement Parts in Mansfield

Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Mansfield with no counter wait. Nearly every common failure is a stocked, inexpensive item.

Fast Shipping
Order by 1 PM CST
100% OEM
Never aftermarket
Shared Kits
X5 and X7 use the same pump kit

Delivering across Mansfield

5 ZIP codes served:
75104, 76001, 76063, 76065, 76084

Pump, suction, gun, electrical — and the machine itself

Find it by symptom

What Your X5 Is Doing, and What Usually Fixes It

Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.

Will Not Prime

Most often a stuck intake ball or split suction tube.

Loses Pressure

Normally worn pump packings.

Spits or Tails

A worn tip gives fingers and tails.

Will Not Start

Control board or enclosure, once power is ruled out.

X5 parts by system

Serving Mansfield and the wider Texas area

Not sure which part?

Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.

+1 713-931-4102 or browse the parts diagrams →

Magnum X5 Parts in Mansfield — Common Questions

Straight answers for homeowners repairing their own sprayer in Mansfield, Texas.

Do you ship X5 parts to Mansfield?

Yes — we ship to all 5 Mansfield ZIP codes, including 75104, and across Texas. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.

Is it worth repairing an X5, or should I replace it?

In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.

Do X5 and X7 parts interchange?

Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.

My X5 will not prime — what do I change?

Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.

Are these genuine Graco parts?

We stock authentic Graco components only. Copy parts often cost more in the long run than they save.

How do I stop it failing again?

Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.

Magnum X5 Parts for Mansfield, Texas

Get genuine Graco sprayers and parts delivered to Mansfield, Texas through Sprayersandparts.com. Our inventory covers thousands of OEM components for Magnum, ProX, FinishPro, and Ultra Max series sprayers — all shipping to Mansfield (75104, 76001, 76063, 76065, and more). Specialty items like Graco DataTrak displays, SmartControl pressure systems, and DualTip spray gun handles are available alongside everyday consumables such as tips, strainers, and lubricant. We carry parts for both electric and gas-powered Graco sprayer models. All orders ship with tracking, and our support team can help you identify the correct part number for your specific Graco sprayer. For painters in Mansfield, Sprayersandparts.com is the reliable online alternative to hunting parts locally.

We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 5 Mansfield ZIP codes (75104, 76001, 76063, 76065, 76084). Orders placed by 1 PM CST ship the same business day.

The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Genuine Graco, never aftermarket
Shared Kits
X5 and X7 pump kit in common
5 ZIPs
Covered in Mansfield alone

Serving Texas Homes and Workshops

Airless painting in Mansfield, Texas demands reliable equipment. Graco's lineup — from the compact Magnum X5 to the high-volume Ultra Max II 1095 — covers every application scale, and keeping these sprayers running requires genuine OEM parts, not substitutes that can wear prematurely or fail mid-job. Keep Sprayersandparts.com bookmarked for your Graco parts needs in Mansfield, Texas. From emergency replacements to scheduled maintenance parts, we have the inventory, the shipping speed, and the product knowledge to keep your operation running.

Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.

Texas painters rely on Sprayers and Parts for authentic Graco sprayers, guns and replacement components. We deliver to 190 cities statewide, from Abilene, Addison, Alamo and beyond.Because we operate online rather than through a trade counter, our inventory runs far deeper than a regional dealer — including legacy and discontinued Graco part numbers going back two decades. Anything ordered by 1 PM CST leaves the warehouse that day and is tracked to your door.

Every Texas order ships from the same warehouse on the same schedule.

Working outside Mansfield? Browse every Texas city we ship to to find your area.

Find Us on Google

See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Mansfield.

View Our Google Profile
+1 713-931-4102
Fast shipping to Mansfield 75104

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
“Needed a replacement 17C875 Brand Label, part number 17C875, and it matched the original spec exactly, down to the part number. Glad we found the exact part number we needed.”
Verified Buyer · Part #17C875
“Needed a replacement 257159 SuperFlex Air Hose, 30 ft, part number 257159, and it solved the issue we were having right away. Good value for a genuine Graco part.”
Verified Buyer · Part #257159
“Needed a replacement 17C725 Pressure Control Indicator, part number 17C725, and it fit perfectly with no modifications needed. Exactly what was described - no complaints.”
Verified Buyer · Part #17C725
“Wasn't sure about the fit at first, but for the 17W879 Bare Handheld Drum Assembly, Arbor, Shafts, End Plate and Fa... (Part #17W879) and it's holding up well after regular use on the job. No issues at all - does exactly what it should.”
Verified Buyer · Part #17W879
“Ordered the 18B260 Pump Packing Kit for Graco 290 to 595 Sprayers (18B260) for our crew - it fit perfectly with no modifications needed. Saved us a trip to the dealer.”
Verified Buyer · Part #18B260
“Ordered the 245065 085 Diaphragm Repair Kit (245065) for our crew - the build quality matched what we expect from genuine Graco parts. Saved us a trip to the dealer.”
Verified Buyer · Part #245065
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart