Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
South-salt-lake, Utah

Magnum X5 Replacement Parts in South-salt-lake

Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to South-salt-lake with no counter wait. Nearly every common failure is a stocked, inexpensive item.

Fast Shipping
Order by 1 PM CST
100% OEM
Never aftermarket
Shared Kits
X5 and X7 use the same pump kit

Delivering across South-salt-lake

5 ZIP codes served:
84106, 84115, 84119, 84165, 84190

Pump, suction, gun, electrical — and the machine itself

Find it by symptom

What Your X5 Is Doing, and What Usually Fixes It

Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.

Will Not Prime

Most often a stuck intake ball or split suction tube.

Loses Pressure

Normally worn pump packings.

Spits or Tails

A worn tip gives fingers and tails.

Will Not Start

Control board or enclosure, once power is ruled out.

X5 parts by system

Serving South-salt-lake and the wider Utah area

Not sure which part?

Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.

+1 713-931-4102 or browse the parts diagrams →

Magnum X5 Parts in South-salt-lake — Common Questions

Straight answers for homeowners repairing their own sprayer in South-salt-lake, Utah.

Do you ship X5 parts to South-salt-lake?

Yes — we ship to all 5 South-salt-lake ZIP codes, including 84106, and across Utah. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.

Is it worth repairing an X5, or should I replace it?

In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.

Do X5 and X7 parts interchange?

Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.

My X5 will not prime — what do I change?

Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.

Are these genuine Graco parts?

We stock authentic Graco components only. Copy parts often cost more in the long run than they save.

How do I stop it failing again?

Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.

Magnum X5 Parts for South-salt-lake, Utah

Get genuine Graco sprayers and parts delivered to South-salt-lake, Utah through Sprayersandparts.com. Our inventory covers thousands of OEM components for Magnum, ProX, FinishPro, and Ultra Max series sprayers — all shipping to South-salt-lake (84106, 84115, 84119, 84165, and more). Specialty items like Graco DataTrak displays, SmartControl pressure systems, and DualTip spray gun handles are available alongside everyday consumables such as tips, strainers, and lubricant. We carry parts for both electric and gas-powered Graco sprayer models. All orders ship with tracking, and our support team can help you identify the correct part number for your specific Graco sprayer. For painters in South-salt-lake, Sprayersandparts.com is the reliable online alternative to hunting parts locally.

We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 5 South-salt-lake ZIP codes (84106, 84115, 84119, 84165, 84190). Orders placed by 1 PM CST ship the same business day.

The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Genuine Graco, never aftermarket
Shared Kits
X5 and X7 pump kit in common
5 ZIPs
Covered in South-salt-lake alone

Serving Utah Homes and Workshops

Airless painting in South-salt-lake, Utah demands reliable equipment. Graco's lineup — from the compact Magnum X5 to the high-volume Ultra Max II 1095 — covers every application scale, and keeping these sprayers running requires genuine OEM parts, not substitutes that can wear prematurely or fail mid-job. Keep Sprayersandparts.com bookmarked for your Graco parts needs in South-salt-lake, Utah. From emergency replacements to scheduled maintenance parts, we have the inventory, the shipping speed, and the product knowledge to keep your operation running.

Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.

From small residential jobs to full commercial repaints, Utah contractors source Graco parts through Sprayers and Parts. Orders go out daily to 48 Utah locations, including American Fork, Bountiful, Brigham City.Running online instead of a storefront lets us hold stock most local suppliers cannot justify, right down to obsolete components for older machines still earning their keep. Orders placed before 1 PM CST ship the same business day, with tracking on every parcel.

Every Utah order ships from the same warehouse on the same schedule.

Working outside South-salt-lake? Browse every Utah city we ship to to find your area.

Find Us on Google

See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to South-salt-lake.

View Our Google Profile
+1 713-931-4102
Fast shipping to South-salt-lake 84106

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
“Ordered the 16X909 Coupled Hose 3/8" ID (16X909) for our crew - it's holding up well after regular use on the job. This is now our go-to for replacement parts.”
Verified Buyer · Part #16X909
“Needed a replacement LP619 Low Pressure RAC X LP SwitchTip, 619, part number LP619, and it solved the issue we were having right away. Will be ordering more parts from here.”
Verified Buyer · Part #LP619
“Ordered the 17C828 Label, Brand, Ultramaxii, 490, Bttm (17C828) for our crew - it fit perfectly with no modifications needed. Good value for a genuine Graco part.”
Verified Buyer · Part #17C828
“Had this on hand as a spare and this 286417 RAC 5 Reversible SwitchTip and the build quality matched what we expect from genuine Graco parts. Part #286417 matched exactly. Saved us a trip to the dealer.”
Verified Buyer · Part #286417
“Ordered the 287902 Tall Manifold Filter Cap (287902) for our crew - it matched the original spec exactly, down to the part number. Good value for a genuine Graco part.”
Verified Buyer · Part #287902
“Needed a replacement 19Y110 Kit, Repair, Valve, Pressure Set, part number 19Y110, and it solved the issue we were having right away. Easy to order once I had the part number from the diagram.”
Verified Buyer · Part #19Y110
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart