Magnum X5 Replacement Parts in Martha-lake
Genuine Graco spares to get an X5 running again — pump kits, suction sets, guns and control parts, sent straight to Martha-lake from our own shelves. A repack usually costs a fraction of a replacement machine.
Delivering across Martha-lake
5 ZIP codes served:
98012, 98036, 98037, 98087, 98208
What Your X5 Is Doing, and What Usually Fixes It
Most Magnum faults fall into a small number of patterns. Start with what it is doing, not with the parts list. A two-minute call usually saves a wrong part.
Will Not Prime
Usually the intake valve or suction set.
Loses Pressure
The pump repair kit covers this.
Spits or Tails
Tip wear or a tired gun seat.
Will Not Start
Check the supply first, then the control board.
X5 parts by system
Serving Martha-lake and the wider Washington area
- Pump repair kit — shared across X5 and X7
- Intake valve & suction set — priming faults
- Prime/spray drain valve — will not switch or leaks
- TrueAirless tips — pattern and finish problems
- Hose sets & extensions — reach and replacements
- Control board & enclosure — electrical faults
Not sure which part?
Tell us the symptom and the model — we can normally name the part from the behaviour alone.
+1 713-931-4102 or browse the parts diagrams →We also ship to 8 nearby Washington communities
Des-moines, Tukwila, Wenatchee, Silverdale, Spokane-valley, Frederickson, Lakewood, Sammamish
Magnum X5 Parts in Martha-lake — Common Questions
Straight answers for homeowners repairing their own sprayer in Martha-lake, Washington.
Do you ship X5 parts to Martha-lake?
Yes — we ship to all 5 Martha-lake ZIP codes, including 98012, and across Washington. Orders placed by 1 PM CST ship the same business day. Small parts go out by post, so they arrive quickly.
Is it worth repairing an X5, or should I replace it?
Usually repair — the economics favour it heavily. Most repairs come to far less than a new unit. Replacement only really makes sense if the housing is cracked or the motor has failed outright.
Do X5 and X7 parts interchange?
Largely yes; the main pump kit is listed for X5 and X7 together. Most accessories fit the whole Magnum family. Enclosure and housing parts are model specific, so check those. We will verify fit against your exact unit.
My X5 will not prime — what do I change?
Usually the intake ball is stuck or the suction tube has split. Dried paint holding the intake ball on its seat is the most common cause of all. Failing that, look at the packings.
Are these genuine Graco parts?
All parts are original Graco, never aftermarket copies. Aftermarket packings wear differently and can score the cylinder.
How do I stop it failing again?
Flush it thoroughly straight after use. Pump protector stops the packings drying out between jobs. Almost every part we sell for these machines is replacing damage caused by dried paint.
Magnum X5 Parts for Martha-lake, Washington
In Martha-lake, Washington, painters and contractors can order any genuine Graco part or sprayer through Sprayersandparts.com and receive it quickly. We ship to Martha-lake (98012, 98036, 98037, 98087, and more) and process every order with care. We stock the complete Graco parts ecosystem: airless spray tips (RAC X, RAC IV, RAC V, SwitchTip), tip guards, gun filters, suction sets, fluid outlet valves, drive housings, motor assemblies, pressure control knobs, hose swivels, and full piston pump repair kits. All items are factory-genuine Graco. With thousands of Graco parts in stock and same-business-day shipping to Martha-lake, Sprayersandparts.com minimizes your downtime and keeps your projects on schedule. Browse our catalog or search by part number to order today.
We carry real depth on fast-wearing components — packings, filters, spray tips and pressure controls — and ship to all 5 Martha-lake ZIP codes (98012, 98036, 98037, 98087, 98208). Same-day dispatch on orders in before 1 PM CST.
Why it matters: most X5s written off as dead need an intake valve and an hour — usually for less than the price of the paint you were going to spray.
Serving Washington Homes and Workshops
Paint sprayer performance comes down to parts quality. In Martha-lake, Washington, professionals who have switched to genuine Graco OEM components report fewer pressure drops, longer pump life, and better tip-to-tip consistency than those who rely on aftermarket alternatives. Painters in Martha-lake, Washington can rely on Sprayersandparts.com for consistent inventory, genuine Graco quality, and shipping they can track. Order today and have your parts in hand before your next job.
Tell us your model and serial number and we will confirm the exact part before you order. We ship direct instead of running a counter, which lets us hold parts for machines twenty years old.
Across Washington, painting crews and property maintenance teams order their Graco parts from Sprayers and Parts. We deliver to 87 cities statewide, from Aberdeen, Anacortes, Arlington and beyond.Because we operate online rather than through a trade counter, our inventory runs far deeper than a regional dealer — including legacy and discontinued Graco part numbers going back two decades. Anything ordered by 1 PM CST leaves the warehouse that day and is tracked to your door.
Wherever you are in Washington, the same stock and the same dispatch times apply.
Working outside Martha-lake? Browse every Washington city we ship to to find your area.
Find Us on Google
Check our profile, ratings and opening hours on our Google Business Profile — then order online for delivery to Martha-lake.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.
Small part but exactly what I needed. Fit perfectly, installed easily, and feels durable. Got my cutter assembly working like it should again. Good quality genuine Graco part.
”