Graco 795 Standard Lo-Boy Filter Parts List

Stay Job-Ready with Long-Life Graco 795 Standard Lo-Boy Filter Parts List Components | Authentic Graco 795 Standard Lo-Boy Filter Parts List parts

Nothing torpedoes a profitable paint day faster than a clogged manifold. Graco 795 Standard Lo-Boy already ships with a heavy-duty Chromex™ pump and Advantage Drive™ gears, but its real MVP is the filtration stack that shields pistons and tips from trash in every five-gallon pail. Over time those screens wear, threads round off, or an ever-eager apprentice forgets to rinse mud before it flash-dries. Cue premature rod scoring, pressure spikes, and a tip pattern that looks like a splatter party. The cure is cheap: keep a labelled bin of OEM Easy-Out™ manifold filters (60, 100, 200 mesh), graco stainless inlet strainers, and colour-coded gun filters on every rig.

Why Choose Genuine Graco 795 Filter Parts?

• Perfect Tolerance Threads – coarse caps mate to manifold bodies without cross-thread risk, cutting swap time in half.
• Full-Depth Stainless Mesh – 40 % larger filtration surface than aftermarket copies means longer spray intervals.
• Colour Coding – black (60-mesh), blue (100-mesh), red (200-mesh) sleeves end the “which screen?” debate on busy trailers.
• Pressure-Rated Welds – every cage meets Graco’s 3 300 psi burst spec so stray weld beads don’t shear inside the pump.
• Backed by Graco.

Filter Parts List: What Should Be in Your Truck?

Mesh and colour code per Graco accessory spec sheets.

Compatible Machines Kept Running by the Same Filters

Graco standardizes filtration across its small- and mid-electric platforms, so a six-pack of Easy-Outs keeps more than your 795 spraying:

• 695 Graco Paint Sprayer—identical manifold cap thread and suction strainer.
• GMAX 3400 gas units—same long-body filters when you upsize to ⅜″ hose for elastomerics.
• Graco Spray Texture Machine (Mark V HD)—uses 60-mesh black filters when shooting drywall mud.
• TrueCoat 360 Handhelds—RAC X tips & accessory pack snap onto gun heads for emergency cabinet touch-ups.

Pro Tips to Stretch Filter Life

1. Pre-screen your paint. A 5-gal elastic-mesh bag costs $4 and removes dried skin before it hits the suction strainer.
2. Back-flush at lunch. Reverse-flush with clean water or solvent for 15 seconds; traps stay open longer.
3. Colour-code crews. Black caps for wall rigs, blue for trim rigs. No more “wrong mesh” chatter on the radio.
4. Log screen swaps. Use painter’s tape on the frame—date, mesh, operator initials. Accountability stops mystery flow loss.
5. Keep a magnet. Pass it over the pail rim to yank nail heads before they jam the inlet ball.

Sustainability & Compliance

Using the correct mesh cuts tip pressure up to 500 psi, trimming overspray atomized VOCs by roughly 12 lb on a 200-gal repaint. Easy-Out filters flush clean with 40 % less solvent than generic screens thanks to larger flow channels, helping crews hit local wastewater guidelines and LEED v4 EQc4 targets.

Frequently Asked Questions

How often should I change a manifold filter?

Daily for heavy latex, every two days for stains. If you see ≥300 psi pressure jump or pattern tails, swap immediately.

Do I need different meshes for primer vs. enamel?

Yes—60 mesh (black) for thicker latexes; 100 mesh (blue) for clears & enamels; 200 mesh (red) for very thin stains.

Will these filters fit my 695 Hi-Boy?

Absolutely—695 and 795 share the same manifold body and cap thread.

Can I clean a filter with a wire brush?

Never; it peels mesh strands and seeds future clogs. Soak in Pump Armor® and back-flush instead.

Ready to Keep Your 795 Spraying Instead of Spitting?

Click the button below, fill your cart with OEM any mesh screens, and add an inlet strainer for good measure. With SprayersAndParts you spend pennies on prevention, not hundreds on downtime.

Shop Graco 795 Filter Packs →