Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
South-whittier, California

Magnum X5 Replacement Parts in South-whittier

Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to South-whittier with no counter wait. Nearly every common failure is a stocked, inexpensive item.

Fast Shipping
Order by 1 PM CST
100% OEM
Never aftermarket
Shared Kits
X5 and X7 use the same pump kit

Delivering across South-whittier

2 ZIP codes served:
90604, 90605

Pump, suction, gun, electrical — and the machine itself

Find it by symptom

What Your X5 Is Doing, and What Usually Fixes It

Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.

Will Not Prime

Most often a stuck intake ball or split suction tube.

Loses Pressure

Normally worn pump packings.

Spits or Tails

A worn tip gives fingers and tails.

Will Not Start

Control board or enclosure, once power is ruled out.

X5 parts by system

Serving South-whittier and the wider California area

Not sure which part?

Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.

+1 713-931-4102 or browse the parts diagrams →

Magnum X5 Parts in South-whittier — Common Questions

Straight answers for homeowners repairing their own sprayer in South-whittier, California.

Do you ship X5 parts to South-whittier?

Yes — we ship to all 2 South-whittier ZIP codes, including 90604, and across California. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.

Is it worth repairing an X5, or should I replace it?

In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.

Do X5 and X7 parts interchange?

Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.

My X5 will not prime — what do I change?

Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.

Are these genuine Graco parts?

We stock authentic Graco components only. Copy parts often cost more in the long run than they save.

How do I stop it failing again?

Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.

Magnum X5 Parts for South-whittier, California

Sprayersandparts.com supplies South-whittier, California with authentic Graco airless sprayers and OEM parts. From simple filters and tips to complete pump rebuild kits, every item ships directly to South-whittier (90604, 90605) — no waiting on a local distributor. Our inventory covers Graco's entire residential and contractor sprayer line, including Magnum series (X3, X5, X7, ProX19), TrueCoat, FinishPro HVLP, Ultra Max II, GMax, and King sprayers. We also stock texture sprayer parts for the Graco ToughTek and RTX series. Sprayersandparts.com ships Graco parts to South-whittier with tracking on every order. Our team is available to help you confirm part compatibility, troubleshoot your sprayer, or advise on the right tip size for your coating and application.

We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 2 South-whittier ZIP codes (90604, 90605). Anything ordered before 1 PM CST leaves that day.

The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Genuine Graco, never aftermarket
Shared Kits
X5 and X7 pump kit in common
2 ZIPs
Covered in South-whittier alone

Serving California Homes and Workshops

For South-whittier, California painting contractors, equipment reliability directly affects project schedules and profitability. A worn pump packing, a clogged filter, or a damaged spray tip can stop a crew in its tracks. Stocking a few key Graco OEM replacement parts prevents that scenario. For South-whittier, California painting professionals, Sprayersandparts.com is the straightforward solution: genuine Graco parts, a full sprayer catalog, fast shipping, and support when you need help identifying what your sprayer needs.

Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.

We ship genuine Graco equipment to painting professionals throughout California. Our California coverage spans 427 cities and towns — among them Adelanto, Agoura Hills, Agoura.We are a direct shipper rather than a walk-in store, which is exactly why we can carry the slow-moving and superseded parts that keep older sprayers running. Same-day dispatch applies to orders in before 1 PM CST, tracked the whole way.

Every California order ships from the same warehouse on the same schedule.

Working outside South-whittier? Browse every California city we ship to to find your area.

Find Us on Google

See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to South-whittier.

View Our Google Profile
+1 713-931-4102
Fast shipping to South-whittier 90604

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
“Had this on hand as a spare and for the 109213 Packing O-Ring (Part #109213) and the fit and finish were spot on, no surprises. Will be ordering more parts from here.”
Verified Buyer · Part #109213
“Ordered the 25D238 Xtreme Packing Repair kit (25D238) for our crew - installation took less than ten minutes. Would order again without hesitation.”
Verified Buyer · Part #25D238
“Needed a replacement 15G320 PTFE Washer 1.2 OD, part number 15G320, and it's holding up well after regular use on the job. Good value for a genuine Graco part.”
Verified Buyer · Part #15G320
“Needed a replacement 17B653 2 Speed Motor and Control Kit, part number 17B653, and it fit perfectly with no modifications needed. Will be ordering more parts from here.”
Verified Buyer · Part #17B653
“Ordered the 24B828 Piston Valve (24B828) for our crew - it fit perfectly with no modifications needed. Exactly what was described - no complaints.”
Verified Buyer · Part #24B828
“The 17Y470 Contractor PC Airless Spray Gun (Part #17Y470) - it's holding up well after regular use on the job. Easy to order once I had the part number from the diagram.”
Verified Buyer · Part #17Y470
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart