Magnum X5 Replacement Parts in Round-lake
Genuine Graco spares to get an X5 running again — pump kits, suction sets, guns and control parts, sent straight to Round-lake from our own shelves. A repack usually costs a fraction of a replacement machine.
Delivering across Round-lake
1 ZIP codes served:
60073
What Your X5 Is Doing, and What Usually Fixes It
Most Magnum faults fall into a small number of patterns. Start with what it is doing, not with the parts list. A two-minute call usually saves a wrong part.
Will Not Prime
Usually the intake valve or suction set.
Loses Pressure
The pump repair kit covers this.
Spits or Tails
Tip wear or a tired gun seat.
Will Not Start
Check the supply first, then the control board.
X5 parts by system
Serving Round-lake and the wider Illinois area
- Pump repair kit — shared across X5 and X7
- Intake valve & suction set — priming faults
- Prime/spray drain valve — will not switch or leaks
- TrueAirless tips — pattern and finish problems
- Hose sets & extensions — reach and replacements
- Control board & enclosure — electrical faults
Not sure which part?
Tell us the symptom and the model — we can normally name the part from the behaviour alone.
+1 713-931-4102 or browse the parts diagrams →We also ship to 8 nearby Illinois communities
Grayslake, Bridgeview, Danville, Quincy, Arlington-heights, North-aurora, North-chicago, Westchester
Magnum X5 Parts in Round-lake — Common Questions
Straight answers for homeowners repairing their own sprayer in Round-lake, Illinois.
Do you ship X5 parts to Round-lake?
Yes — we ship to all 1 Round-lake ZIP codes, including 60073, and across Illinois. Orders placed by 1 PM CST ship the same business day. Small parts go out by post, so they arrive quickly.
Is it worth repairing an X5, or should I replace it?
Usually repair — the economics favour it heavily. Most repairs come to far less than a new unit. Replacement only really makes sense if the housing is cracked or the motor has failed outright.
Do X5 and X7 parts interchange?
Largely yes; the main pump kit is listed for X5 and X7 together. Most accessories fit the whole Magnum family. Enclosure and housing parts are model specific, so check those. We will verify fit against your exact unit.
My X5 will not prime — what do I change?
Usually the intake ball is stuck or the suction tube has split. Dried paint holding the intake ball on its seat is the most common cause of all. Failing that, look at the packings.
Are these genuine Graco parts?
All parts are original Graco, never aftermarket copies. Aftermarket packings wear differently and can score the cylinder.
How do I stop it failing again?
Flush it thoroughly straight after use. Pump protector stops the packings drying out between jobs. Almost every part we sell for these machines is replacing damage caused by dried paint.
Magnum X5 Parts for Round-lake, Illinois
Round-lake, Illinois professionals trust Sprayersandparts.com for factory-genuine Graco parts and equipment. Whether you need a replacement pump, tip, filter, or a complete airless sprayer, we ship to Round-lake (60073) quickly and reliably. Professional painters in Illinois choose Sprayersandparts.com because we maintain deep stock of Graco's most commonly replaced parts: RAC X tips, pump repair kits, gun filters, suction tubes, and hose assemblies — so you're never waiting weeks for back-ordered items. Choosing genuine Graco parts means your sprayer performs as Graco intended — consistent pressure, reliable atomization, and a longer service life. Order from Sprayersandparts.com today and receive your parts in Round-lake without the hassle of searching multiple suppliers.
We carry real depth on fast-wearing components — packings, filters, spray tips and pressure controls — and ship to all 1 Round-lake ZIP codes (60073). Anything ordered before 1 PM CST leaves that day.
Why it matters: most X5s written off as dead need an intake valve and an hour — usually for less than the price of the paint you were going to spray.
Serving Illinois Homes and Workshops
Graco's service life depends heavily on correct maintenance and genuine parts. For Round-lake, Illinois painters who rely on their sprayers daily, keeping a stock of key OEM components — tips, filters, and a piston pump repair kit — is standard professional practice. Sprayersandparts.com is committed to keeping Round-lake, Illinois painters productive. Genuine Graco parts, fast order processing, and knowledgeable support mean you spend less time sourcing and more time painting.
Tell us your model and serial number and we will confirm the exact part before you order. We ship direct instead of running a counter, which lets us hold parts for machines twenty years old.
Illinois painters rely on Sprayers and Parts for authentic Graco sprayers, guns and replacement components. Our Illinois coverage spans 216 cities and towns — among them Addison, Algonquin, Alsip.We are a direct shipper rather than a walk-in store, which is exactly why we can carry the slow-moving and superseded parts that keep older sprayers running. Same-day dispatch applies to orders in before 1 PM CST, tracked the whole way.
Wherever you are in Illinois, the same stock and the same dispatch times apply.
Working outside Round-lake? Browse every Illinois city we ship to to find your area.
Find Us on Google
Check our profile, ratings and opening hours on our Google Business Profile — then order online for delivery to Round-lake.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.